UK Buell Enthusiasts Group
https://ukbeg.com/forum/

1125r air box cover removal
https://ukbeg.com/forum/viewtopic.php?f=8&t=23393		 Page 1 of 1
Author:  Jazzbutcher [ 31 Aug 2018 22:33 ]
Post subject:  1125r air box cover removal
Hi folks,

Still trying to get the low down running on my 1125r a bit smoother.

Has anyone got any experience of removing the air box cover. Mine came without one fitted but with a standard air cleaner. I'm thinking this may have weakened the mixture low down.

Also (Sorry) anyone had any good experiences with better plugs than standard ones. IE iridium, triple point or anything?

Anyone got any ideas?

Thanks in advance. Paul.
Author:  Maz [ 31 Aug 2018 22:49 ]
Post subject:  Re: 1125r air box cover removal
Impossible to weaken mixture.....lambda's take care of that.
Airbox cover needs to be fitted, run a K+N filter and make sure to get rid of the AIC.
Standard plugs are fine, iridium better.
Author:  Jazzbutcher [ 31 Aug 2018 23:55 ]
Post subject:  Re: 1125r air box cover removal
Thanks Maz,

I was totally unaware that lambdas do that, & it's a very interesting piece of info.

K&N is easy enough to get but think I need the air box cover more at this point.

Can you clarify what the AIC is, where it is & why I needs to come off thanks?

The guy I bought it off is meant to be sending the air box cover to me but seems in little rush to do this. Maybe I can hurry him along a bit, like right after this.

Pash bless him sent me & Lent me an ECU with the BUE2D firmware which has improved it quite a bit, but not to the extent I was hoping. I'm now getting keener for the air box cover.

I was thinking iridiums, easy to get as pair for £16.80 for a pair on ebay, used them before with great results in Triumphs.

Thanks for your help Maz.

I'll take a ride over to your Emporium when I get this sorted. It's only 60miles or so from where I am. I'd like to just meet & great & have a look at what you do as you come very highly recomended on here.

All the best Paul.
Author:  Maz [ 01 Sep 2018 00:34 ]
Post subject:  Re: 1125r air box cover removal
Active Intake Control or 'noise police'......it's a solenoid that can shut the throttle even if you have it pinned wide open !.....very dangerous IMO and should be removed asap :idea:
Author:  pash [ 01 Sep 2018 07:01 ]
Post subject:  Re: 1125r air box cover removal
Disable AIC here

viewtopic.php?f=17&t=5066
Author:  Kiwi [ 01 Sep 2018 09:03 ]
Post subject:  Re: 1125r air box cover removal
Awesome you are Pash :yup:
Author:  Jazzbutcher [ 01 Sep 2018 10:18 ]
Post subject:  Re: 1125r air box cover removal
Kiwi wrote:
Awesome you are Pash :yup:



I totally agree with that statement.

Paul.
Author:  Jazzbutcher [ 05 Sep 2018 01:25 ]
Post subject:  Re: 1125r air box cover removal
Bagged myself a complete airbox with K&N for £57 all in that my wife (bless her) funded for me.
Aren't partners great, or maybe she wants me to shut the F**k up ha ha.
Doesn't look like the guy I go bought off is in any rush to send the original. That's annoying, Snarl. But I would have still bought a K&N for £40/50 anyway I guess, so a bargain.
Hopefully this may address the im balance at the moment. Keep you informed. Paul & Thanks always.
Author:  pash [ 05 Sep 2018 09:40 ]
Post subject:  Re: 1125r air box cover removal
:yup:
Author:  Jazzbutcher [ 12 Sep 2018 12:50 ]
Post subject:  Re: 1125r air box cover removal
Hiya Folks,

Yahoo, Air box turned up today, complete with K&N filter, I'll let you know how it goes when I've got it cleaned & fitted.

Here's hoping.

All the best Paul.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/