| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 1125r Cr Oil cooler Guard (pattern) https://ukbeg.com/forum/viewtopic.php?f=8&t=23426 |
Page 1 of 1 |
| Author: | Jazzbutcher [ 13 Sep 2018 12:06 ] | ||
| Post subject: | 1125r Cr Oil cooler Guard (pattern) | ||
Hi 1125 owners. Just made this as a temporary solution to an extremely vulnerable oil cooler. Just a pattern at the moment hence the tie wraps, but it works & is as easy to make as drinking a pint. All the best Paul.
|
|||
| Author: | pash [ 13 Sep 2018 16:00 ] |
| Post subject: | Re: 1125r Cr Oil cooler Guard (pattern) |
|
|
| Author: | Jazzbutcher [ 14 Sep 2018 01:13 ] |
| Post subject: | Re: 1125r Cr Oil cooler Guard (pattern) |
Thanks Pash, Simple but practical, almost as good as my petrol pipe fix on the battery connector. Ha ha. Sits about an 10mm away from the fins and has to help cooling as its isolated on rubber & totally in moving fresh air. You'll see when I do the next one which eliminates the rubber in favour of stainless hole cover plates & alloy spacers so connects the metal together to allow heat transfer from one to the other. similar to a heat sink on a rectifier. All the best Pash. I'll Pm you if that's ok. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|