UK Buell Enthusiasts Group
https://ukbeg.com/forum/

ECMspy Testing.
https://ukbeg.com/forum/viewtopic.php?f=8&t=23534
Page 1 of 1

Author:  sparrowjack [ 15 Nov 2018 15:16 ]
Post subject:  ECMspy Testing.

Hola, Techies.

After a recent post in the new members section, i did as advised on my Buell Woes and installed ecmspy. After 2 days and 1,000,000,000 attempts i finally got it running and what's worse, there's no codes!

My issue is the bike cutting out after 10-15 minutes of riding and not being able to start til it's cooled down. It turns like it wants to start but almost as if it's not getting fuel.

I've checked almost every possible reason for it and nothing. The only thing i have found is when running tests on ecmspy ten minutes ago, it's unable to complete a test on the fuel pump. Could this be the true cause of the fault and is there a better way to check than using a multi-meter?

TIA

Author:  pash [ 15 Nov 2018 15:53 ]
Post subject:  Re: ECMspy Testing.

Could be one of many things but check this out as it sounds similar...

viewtopic.php?p=148665#p148665

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/