UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Hidden rear caliper bracket
https://ukbeg.com/forum/viewtopic.php?f=8&t=23644		 Page 1 of 1
Author:  RISL [ 20 Jan 2019 16:18 ]
Post subject:  Hidden rear caliper bracket
Goodafternoon!
I bought this bracket for my XB a few weeks ago but can't find which caliper should be mounted on it.
The mounting holes for the caliper are 90 mm apart. There is no mark on it, but it doesn't look 'home made'.

There are several Brembo's with mounting holes 90 mm apart, but I can't find anything about the distance between the mounting holes and brake disc (sidewards distance) on the advertisements for the calipers.

Anyone who recognizes this bracket and knows which caliper goes with it?

Thanks!

Attachments:
IMG_20190111_152451.jpg
IMG_20190111_152451.jpg [ 1.74 MiB | Viewed 1990 times ]
IMG_20190111_152401.jpg
IMG_20190111_152401.jpg [ 2.03 MiB | Viewed 1990 times ]
Author:  pash [ 20 Jan 2019 16:34 ]
Post subject:  Re: Hidden rear caliper bracket
Think you are measuring between the wrong holes. I reckon that’s a Freespirits which takes a P32B.

Not as cool as mine (if I may say so myself)...
Author:  RISL [ 20 Jan 2019 16:53 ]
Post subject:  Re: Hidden rear caliper bracket
You're right Pash! Have to measure again.
Thanks for the tip, I'll measure again and compare it with the P32B.

Yours does look much better indeed, but it is hidden, right ;)
Author:  pash [ 20 Jan 2019 17:04 ]
Post subject:  Re: Hidden rear caliper bracket
Schematic is here...
Author:  RISL [ 21 Jan 2019 09:06 ]
Post subject:  Re: Hidden rear caliper bracket
Thanks! Where can I find those drawings? I need these schematics of some other Brembo calipers too.
Author:  pash [ 21 Jan 2019 10:30 ]
Post subject:  Re: Hidden rear caliper bracket
RISL wrote:
Thanks! Where can I find those drawings? I need these schematics of some other Brembo calipers too.

Which ones do you need?
Author:  pash [ 21 Jan 2019 18:02 ]
Post subject:  Re: Hidden rear caliper bracket
One point of note is that there is a Grimeca caliper that uses the same mounting points as the P32B:

https://www.ebay.co.uk/itm/Grimeca-2-pi ... 0448341023

Not sure of the model number for when this auction ends, however the sealing is far better than the 32B. You might want to check it can accommodate the disc in terms of thickness though.
Author:  RISL [ 21 Jan 2019 18:53 ]
Post subject:  Re: Hidden rear caliper bracket
pash wrote:
RISL wrote:
Thanks! Where can I find those drawings? I need these schematics of some other Brembo calipers too.

Which ones do you need?

P32, P32F, P32G and P34, do you have them? Can I find it somewhere on the internet?

Thanks for the link, but I can't find which Grimeca they are selling, and they don't replay to questions. It is pretty cheap though, so maybe worth a try.

In the Netherlands there are almost no calipers for sale. Maybe I found a P32B from an Aprilia Tuono, but also no confirmatie het.
Author:  pash [ 21 Jan 2019 19:10 ]
Post subject:  Re: Hidden rear caliper bracket
I'll sell you a P32B if you get stuck...

P34s follow the same rules as the P32 series... Schematics the same...

P32F

P32G

Anything else, let me know... ;)
Author:  RISL [ 21 Jan 2019 19:15 ]
Post subject:  Re: Hidden rear caliper bracket
Thank you very much, Pash! :worthy:
I'll let you know if I need one!
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/