I am trying to ascertain if my bike has the revised billet front engine mount or is as yet still fitted with the std mount ?
Where should I be looking ? Front it rear , upper or lower ? Pls advise if possible to locate said mount

_________________
Do it with a good heart !!

At front under the headstock

Thanks for the heads up , now I've found what I need how can I tell if it's standard or upgrade .?
Looks like at some point it had the original airbox fitted, but it's on a K&N ram thingy now

_________________
Do it with a good heart !!

Photo attempt

_________________
Do it with a good heart !!

That's the OEM and it will snap.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Spondon440 (Andy) on this site makes the billet ones
they are a thing of skill & beauty

_________________
Feros Ferio

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Appreciate the input I'll get into it

_________________
Do it with a good heart !!

x2

_________________
Last year I joined a group for anti-social people
We haven't met yet.

Have the rear isolators been upgraded as well? The early ones were known to fail.

_________________
If your dreams don't scare you, they are not big enough.

A tie wrap around the top of your clutch cable adjuster boot, will stop water getting in and possibly tracking down into your gearbox. I use a smear of silicone as well.

_________________
If your dreams don't scare you, they are not big enough.

Yeah...……….but not for that

_________________
Dusty 001

_________________
If your dreams don't scare you, they are not big enough.

_________________
Buell Ulysses XB12X 06/08