| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| swinging arm https://ukbeg.com/forum/viewtopic.php?f=8&t=23928 |
Page 1 of 1 |
| Author: | barney66 [ 16 Jul 2019 05:41 ] |
| Post subject: | swinging arm |
Hi, does anybody know if a 2005 Xb12s swing arm will fit my 2003 Xb9s please ? I am after another swinging arm to get powder coated before taking mine off along with a set of wheels Thanks barney |
|
| Author: | pash [ 16 Jul 2019 19:20 ] |
| Post subject: | Re: swinging arm |
Yep it will |
|
| Author: | barney66 [ 16 Jul 2019 19:37 ] |
| Post subject: | Re: swinging arm |
Thanks for the reply barney |
|
| Author: | Jazzbutcher [ 18 Jul 2019 12:16 ] |
| Post subject: | Re: swinging arm |
barney66 wrote: Thanks for the reply barney Don't know if this is any help Barney, I've dealt with them before & they're ok. www.ebay.co.uk/itm/BUELL-XB-9R-FIREBOLT ... Swcj5ZUWsf |
|
| Author: | Adam [ 19 Jul 2019 09:39 ] |
| Post subject: | Re: swinging arm |
Are you having the powder coating done locally in Telford? I've got a few bits and bobs I want coating on the Velocette and the bloke in Oswestry is a bit agricultural. I'll be over on the Hadfield Estate soon taking a brake drum to be skimmed, so I might as well kill two birds with one stone 
|
|
| Author: | barney [ 19 Jul 2019 14:40 ] |
| Post subject: | Re: swinging arm |
Hello Adam  I think you mean the Halesfield Industrial estate , if not it is a bit of trip from Hadfield industrial estate Glossop to Telford
|
|
| Author: | Adam [ 19 Jul 2019 18:43 ] |
| Post subject: | Re: swinging arm |
That's the one..........and that's why I don't get on with SatNavs😂 |
|
| Author: | barney66 [ 22 Jul 2019 19:31 ] |
| Post subject: | Re: swinging arm |
Adam wrote: Are you having the powder coating done locally in Telford? I've got a few bits and bobs I want coating on the Velocette and the bloke in Oswestry is a bit agricultural. I'll be over on the Hadfield Estate soon taking a brake drum to be skimmed, so I might as well kill two birds with one stone Yes m8 that’s the one, Kyops is the place, Kingsland ind est Halesfield if that helps, thought the guy in Oswestry was supposed to be good ? |
|
| Author: | Adam [ 22 Jul 2019 21:26 ] |
| Post subject: | Re: swinging arm |
barney66 wrote: Adam wrote: Are you having the powder coating done locally in Telford? I've got a few bits and bobs I want coating on the Velocette and the bloke in Oswestry is a bit agricultural. I'll be over on the Hadfield Estate soon taking a brake drum to be skimmed, so I might as well kill two birds with one stone Yes m8 that’s the one, Kyops is the place, Kingsland ind est Halesfield if that helps, thought the guy in Oswestry was supposed to be good ? He’s good for agricultural stuff, but not for things that require a ‘pretty’ finish. |
|
| Author: | Bonzo [ 23 Jul 2019 13:43 ] |
| Post subject: | Re: swinging arm |
Adam wrote: He’s good for agricultural stuff Just Harleys then? |
|
| Author: | Nutah [ 23 Jul 2019 16:26 ] |
| Post subject: | Re: swinging arm |
 
|
|
| Author: | Adam [ 23 Jul 2019 16:31 ] |
| Post subject: | Re: swinging arm |
He did once tell me they do a lot of work for Chester HD
|
|
| Author: | Jazzbutcher [ 29 Jul 2019 13:57 ] |
| Post subject: | Re: swinging arm |
Bargain for someone> www.ebay.co.uk/itm/Buell-swing-arm/2332 ... 0008.m2219 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|