Can anyone help me find some form springs for my 1999S1 it has 41mms Showed my springs are approx 230mm long the only ones I've found say they're 350 long which i don't think will fit!! Any help gratefully received
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| S1/X1 fork springs https://ukbeg.com/forum/viewtopic.php?f=8&t=24218 |
Page 1 of 1 |
| Author: | spids [ 23 Jan 2020 14:06 ] |
| Post subject: | S1/X1 fork springs |
Can anyone help me find some form springs for my 1999S1 it has 41mms Showed my springs are approx 230mm long the only ones I've found say they're 350 long which i don't think will fit!! Any help gratefully received
|
|
| Author: | Beef [ 23 Jan 2020 15:34 ] |
| Post subject: | Re: S1/X1 form springs |
You mean Fork springs? |
|
| Author: | spids [ 23 Jan 2020 15:45 ] |
| Post subject: | Re: S1/X1 form springs |
Correct I did but that's predictive text from you |
|
| Author: | barney [ 23 Jan 2020 16:17 ] |
| Post subject: | Re: S1/X1 form springs |
 same as ,' it has 41mms Showed my springs' rather than showa predictive txt ok but not good on tech stuff or names 
|
|
| Author: | ursus americanus [ 23 Jan 2020 17:45 ] |
| Post subject: | Re: S1/X1 form springs |
And if your bike is a 99 model fitted with Showa forks it's most likely to be an X1 even though your V5 may describe it as an S1. Many of us have fitted Showa forks to the S1 because they're generally more compliant than the White Power forks fitted as standard to the S1. Steve |
|
| Author: | TOPGUMM [ 23 Jan 2020 20:00 ] |
| Post subject: | Re: S1/X1 form springs |
Puncture is bitter thin a towel sand worms. |
|
| Author: | Beef [ 24 Jan 2020 11:38 ] |
| Post subject: | Re: S1/X1 form springs |
TOPGUMM wrote: Puncture is bitter thin a towel sand worms.  
|
|
| Author: | Adam [ 24 Jan 2020 16:41 ] |
| Post subject: | Re: S1/X1 form springs |
|
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|