UK Buell Enthusiasts Group
https://ukbeg.com/forum/

ECMspy help please how to confirm exhaust valve swich off
https://ukbeg.com/forum/viewtopic.php?f=8&t=24396		 Page 1 of 1
Author:  ZED1000 [ 21 May 2020 08:14 ]
Post subject:  ECMspy help please how to confirm exhaust valve swich off
From my thread in the Chat section, working my way through the fault code for the " AMC stuck open" 21-5-1. now stalled with confirming the tick to switch off the valve can anyone let me know what i'm doing wrong. (this is my first time using the SPY software first time I have ever used a diagnostic program)

I have searched on here but all the threads relating to this are based on the V1 spy software.

Found my way in to the system cleared the fault code for the exhaust valve and found the enable exhaust valve box in “system” clicked the box which removed the tick but each time I shut spy down and started the bike on came the ECM light again, I go back into spy and find the tick has reappeared, I must be missing a confirm action after I have removed the tick but can’t see how to confirm the action can anyone help.
Author:  03 [ 21 May 2020 09:31 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
I don't know the answer as I am not a fuel infection person. Do you have the pdf file - ECM Tuning Notes for Buell DDFI and DDFI-2 2nd Edition? Shed loads of info in there written by Nick P and Gunter.
Author:  ZED1000 [ 21 May 2020 10:30 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
No I don't have the PDFs you refer to.
I have MOT booked for the morning (been booked for 4 weeks) but obviously will need to cancel if I cant get the light out some how tonight.
Author:  03 [ 21 May 2020 10:42 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
ZED1000 wrote:
No I don't have the PDFs you refer to.
I have MOT booked for the morning (been booked for 4 weeks) but obviously will need to cancel if I cant get the light out some how tonight.

OK probably too late then, but google that text I posted and you should find the pdf.
Author:  Maz [ 21 May 2020 11:06 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
Once you've checked the boxes go to EEPROM on the top tool bar and then burn to ECM.
Author:  ZED1000 [ 21 May 2020 12:17 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
Maz I thank you, :worthy: just wish I lived closer to you i'd much rather pay for you to do the work on my bike this stuff scares me in case I click a wrong box.

might make my mot after all :yup:
Author:  Jazzbutcher [ 21 May 2020 13:05 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
HI Zed,
If all else fails put a couple of layers of nicely trimmed black tape over the light, or disconnect it for the MOT. JB
Author:  ZED1000 [ 21 May 2020 22:16 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
Done it :D :D
Thanks all for your help here, without that help I would have probably given up on the Uly, off to the MOT test in the morning.
Author:  Jazzbutcher [ 21 May 2020 23:21 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
ZED1000 wrote:
Done it :D :D
Thanks all for your help here, without that help I would have probably given up on the Uly, off to the MOT test in the morning.


Nice one, hope the MOT goes ok. :yup:
Author:  ZED1000 [ 24 May 2020 09:23 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
Jazzbutcher wrote:
ZED1000 wrote:
Done it :D :D
Thanks all for your help here, without that help I would have probably given up on the Uly, off to the MOT test in the morning.


Nice one, hope the MOT goes ok. :yup:


Jazz
Thank you for the loan of your lead, I will be posting it back to you during the week as I have with the help of guys on here bought the components and managed to assembled my own ( and it worked :o ).
How are you getting on with your BLANDA sorry Honda loan bike.
Author:  Jazzbutcher [ 24 May 2020 15:37 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
ZED1000 wrote:
Jazzbutcher wrote:
ZED1000 wrote:
Done it :D :D
Thanks all for your help here, without that help I would have probably given up on the Uly, off to the MOT test in the morning.


Nice one, hope the MOT goes ok. :yup:


Jazz
Thank you for the loan of your lead, I will be posting it back to you during the week as I have with the help of guys on here bought the components and managed to assembled my own ( and it worked :o ).
How are you getting on with your BLANDA sorry Honda loan bike.


Hi Zed,
Thanks for posting the lead back (no rush) glad to help & well done for making one. :yup:
Did the bike pass it's MOT?
Only ridden the Honda once & told them to take it back (no response yet & still building costs for the 3rd party & lining somebody's pocket).
I really only ride for the pleasure of riding & for the feel of the 1125r under my control. The Honda isn't a pleasurable ride & a toddler could mange it.
Thanks in advance for the return of the cable. JB
Author:  ZED1000 [ 26 May 2020 20:57 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
MOT past :D :D

The 1125 and a blanda are I would imagine extreme opposite ends of the motorcycle spectrum.
Hope you find your way back to a Buell again soon.
Regards
Andrew
Author:  Jazzbutcher [ 26 May 2020 23:47 ]
Post subject:  Re: ECMspy help please how to confirm exhaust valve swich off
Hi Zed,
Nice One with the test. :yup:
Another year of hassle free riding hopefully. 8-)
All the best JB.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/