| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Handle bar risers https://ukbeg.com/forum/viewtopic.php?f=8&t=24411 |
Page 1 of 1 |
| Author: | Roadtoad [ 29 May 2020 16:44 ] |
| Post subject: | Handle bar risers |
Hi All What is the best method of raising bar height by about 2 inches ? M2 cyclone Thanks |
|
| Author: | TOPGUMM [ 29 May 2020 20:15 ] |
| Post subject: | Re: Handle bar risers |
Take your seat off . |
|
| Author: | Jazzbutcher [ 29 May 2020 21:20 ] |
| Post subject: | Re: Handle bar risers |
|
|
|
| Author: | 03 [ 30 May 2020 01:38 ] |
| Post subject: | Re: Handle bar risers |
Roadtoad wrote: Hi All What is the best method of raising bar height by about 2 inches ? M2 cyclone Thanks Perhaps try S3 bars? |
|
| Author: | TOPGUMM [ 30 May 2020 10:09 ] |
| Post subject: | Re: Handle bar risers |
Used renthal bars to gain height as bar risers would not fit spondon yokes . Check there`s enough on throttle side to take throttle and brake unit (200 ish mm I think ) |
|
| Author: | Roadtoad [ 31 May 2020 07:16 ] |
| Post subject: | Re: Handle bar risers |
Thanks for the input |
|
| Author: | sillyb [ 31 May 2020 09:17 ] |
| Post subject: | Re: Handle bar risers |
Having some made for my X1, as said ones sold don’t fit spondon yokes. Also you will need Longer hoses for the brake as there not long enough to accommodate risers. |
|
| Author: | x1glider [ 05 Jun 2020 18:20 ] |
| Post subject: | Re: Handle bar risers |
Rox risers |
|
| Author: | rik [ 05 Jun 2020 21:14 ] |
| Post subject: | Re: Handle bar risers |
03 wrote: Roadtoad wrote: Hi All What is the best method of raising bar height by about 2 inches ? M2 cyclone Thanks Perhaps try S3 bars? Export Bonnie bars do the job. |
|
| Author: | 03 [ 06 Jun 2020 00:23 ] |
| Post subject: | Re: Handle bar risers |
rik wrote: 03 wrote: Roadtoad wrote: Hi All What is the best method of raising bar height by about 2 inches ? M2 cyclone Thanks Perhaps try S3 bars? Export Bonnie bars do the job. Indeed, but you need to be ancient to know they are. |
|
| Author: | Roadtoad [ 07 Jun 2020 16:01 ] |
| Post subject: | Re: Handle bar risers |
Export Bonnie bars do the job.[/quote] Indeed, but you need to be ancient to know they are.[/quote] I am.......and I do know what they are. Thanks for all your input |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|