| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Fitting LED Indicator bulbs to Ulysses https://ukbeg.com/forum/viewtopic.php?f=8&t=25109 |
Page 1 of 1 |
| Author: | Andysdad [ 10 Apr 2022 21:30 ] |
| Post subject: | Fitting LED Indicator bulbs to Ulysses |
Had 2 10W bulbs blow in 2000 miles, so decided to go LED. Sorry if this has been posted before; I looked but could not find a similar post. Buying the LED bulbs is easy enough (eBay) but the factory flasher unit will flash too fast as the current is much less. I found this relay on Amazon for £6 delivered; called a CF14 it is plug replacement for the factory unit and works with both LED and standard bulbs because it does not use current to set the flash-rate. https://www.amazon.co.uk/Flash-Signal-C ... B00FGRGBXM I ran a bead of black silicone across the top plate/case joint to waterproof it. There is no bracket but a tie-wrap works. HTH A |
|
| Author: | jeznewsome [ 10 Apr 2022 21:36 ] |
| Post subject: | Re: Fitting LED Indicator bulbs to Ulysses |
|
|
|
| Author: | Nutah [ 11 Apr 2022 12:25 ] |
| Post subject: | Re: Fitting LED Indicator bulbs to Ulysses |
| nice one
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|