My 1125CR has a Brembo caliper and an aftermarket disc. Using the brake for slow control it makes a whopping drone noise like a huge tuning fork. On cars I remember taking off the leading edge on the pad with sandpaper lol. I think the pads are way too hard and look shiny as metal so I want to change them. Are the FA266 the correct pads? I only use the rear brake for slow control and trailing through the odd corner. The gearing & engine braking is so sweet it prob don't need brakes anyway
TIA
Pon

It says TTH38GF on the back of the pads but google that & they don't look like that?

https://www.ebay.com/itm/224920178476 dunno found these ? any good ?

_________________
Feros Ferio

Thanks Nutah, I don't think the standard caliper is a Brembo like mine. The pads look similar but have a hole in the lug for the pin. I think it's the same caliper that can be used as a hidden caliper on the XB?

I've read Nicks (Pash) post on the calipers and cryptic pad fitment. I've ordered a set of FA266
I think the pads that are in there at the mo' are up to 5mm too long?

Pash to the rescue

_________________
Feros Ferio