UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Brembo rear pads?
https://ukbeg.com/forum/viewtopic.php?f=8&t=25228		 Page 1 of 1
Author:  Pon [ 25 Aug 2022 18:28 ]
Post subject:  Brembo rear pads?
My 1125CR has a Brembo caliper and an aftermarket disc. Using the brake for slow control it makes a whopping drone noise like a huge tuning fork. On cars I remember taking off the leading edge on the pad with sandpaper lol. I think the pads are way too hard and look shiny as metal so I want to change them. Are the FA266 the correct pads? I only use the rear brake for slow control and trailing through the odd corner. The gearing & engine braking is so sweet it prob don't need brakes anyway ;)
TIA
Pon
Author:  Pon [ 25 Aug 2022 19:02 ]
Post subject:  Re: Brembo rear pads?
It says TTH38GF on the back of the pads but google that & they don't look like that?
Author:  Nutah [ 25 Aug 2022 20:14 ]
Post subject:  Re: Brembo rear pads?
https://www.ebay.com/itm/224920178476 dunno found these ? any good ?
Author:  Pon [ 25 Aug 2022 23:06 ]
Post subject:  Re: Brembo rear pads?
Nutah wrote:
https://www.ebay.com/itm/224920178476 dunno found these ? any good ?

Thanks Nutah, I don't think the standard caliper is a Brembo like mine. The pads look similar but have a hole in the lug for the pin. I think it's the same caliper that can be used as a hidden caliper on the XB?
Author:  Pon [ 27 Aug 2022 10:12 ]
Post subject:  Re: Brembo rear pads?
I've read Nicks (Pash) post on the calipers and cryptic pad fitment. I've ordered a set of FA266
I think the pads that are in there at the mo' are up to 5mm too long?
Author:  Nutah [ 27 Aug 2022 21:58 ]
Post subject:  Re: Brembo rear pads?
:yup: Pash to the rescue
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/