viewtopic.php?f=17&t=22565
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| 2006 Ulysses XB12X Misfire https://ukbeg.com/forum/viewtopic.php?f=8&t=25397 |
Page 1 of 1 |
| Author: | edmand1403 [ 17 Sep 2023 09:55 ] |
| Post subject: | 2006 Ulysses XB12X Misfire |
Hi all, I've had a bit of a misfire on Uly for a while now (too long perhaps) and I've at last got around to looking at it. I thought I'd replace the spark plugs as they had be fitted for a very long time and when I was putting the HT leads back on I notice that there was quite a bit of rust on the connector inside the spark plug cap. After removing both of the HT leads for a better look I noticed that both connectors were extremely rusty and the front one was almost chafed through the insulation, and I was surprised that the bike ran at all. I've got a pair of new Magnecor HT leads on the way and I'm hoping that they'll sort the problem. I'll keep this post up to date with the results. Once I've learn't how to post a picture I'll put one on here. |
|
| Author: | Nutah [ 17 Sep 2023 12:23 ] |
| Post subject: | Re: 2006 Ulysses XB12X Misfire |
viewtopic.php?f=17&t=22565
|
|
| Author: | edmand1403 [ 24 Sep 2023 17:54 ] | ||
| Post subject: | Re: 2006 Ulysses XB12X Misfire | ||
My rusty HT leads, all changed now and running much sweeter.
|
|||
| Author: | barney [ 25 Sep 2023 09:21 ] |
| Post subject: | Re: 2006 Ulysses XB12X Misfire |
|
|
|
| Author: | Nutah [ 27 Sep 2023 16:02 ] |
| Post subject: | Re: 2006 Ulysses XB12X Misfire |
 nice result 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|