UK Buell Enthusiasts Group
https://ukbeg.com/forum/

Remus can Horror
https://ukbeg.com/forum/viewtopic.php?f=8&t=2616		 Page 1 of 1
Author:  cliebenberg [ 15 Sep 2009 14:33 ]
Post subject:  Remus can Horror
Well, I just on the weekend installed my new Remus pipe, Pro Kit ECM and Pro Kit filter which was a fairy enjoyable experience much to my surprise onto my 03 XB9R.

ECMSpy is a great tool that worked beatifully at resetting the TPS, and the new exhaust has such a heavenly sound that I dont really think the neighbours will worry much about the noise :rofl:

Now the horror! Whilst fitting exhaust I noticed that I could not get the standard exhaust clamps back on - they where simply to small! I can't for the life of me get any longer ones from any Buell/HD dealer to fit, so now I have a great sounding/looking bike that cant be ridden because I may lose the exhuast.

Any advice from the more expirienced buellers out there who have fitted a Remus can would be greatful. Oh I should probably mention that the Remus can is for a XB12R fitted to a XB9R, from what I understand there is no difference in diameter of the cans or how they fit.

Regards

Col
Author:  Devonbob [ 15 Sep 2009 15:21 ]
Post subject:  Re: Remus can Horror
I guess that you are talking about the giant jubilee clips. If so could you join two together by winding the tail of one into the other.
Author:  pash [ 15 Sep 2009 15:31 ]
Post subject:  Re: Remus can Horror
When I fitted mine, I never had a problem with the original straps.
Author:  THE FLYING DUCHMAN [ 15 Sep 2009 18:03 ]
Post subject:  Re: Remus can Horror
I thought mine would not be long enough but after a bit of pulling and jiggling it fitted. I had to pull the strap up hard to start my nut ;) ;)

Have another try as they are a bit on the short side.
Author:  pash [ 15 Sep 2009 18:24 ]
Post subject:  Re: Remus can Horror
THE FLYING DUCHMAN wrote:
I thought mine would not be long enough but after a bit of pulling and jiggling it fitted. I had to pull the strap up hard to start my nut ;) ;)

Have another try as they are a bit on the short side.


Thinking back, I seem to remember the same... Anyone would think it was the same muffler... ;)
Author:  zoidberg [ 15 Sep 2009 19:16 ]
Post subject:  Re: Remus can Horror
pash wrote:
When I fitted mine, I never had a problem with the original straps.



:yt:
Author:  Nate [ 15 Sep 2009 21:30 ]
Post subject:  Re: Remus can Horror
Usually large stainless clips like this are available from good industrial supplies. They are use alot in industry that use large pipework, ducting and dust controll etc.

Nate.
Author:  cliebenberg [ 17 Sep 2009 11:17 ]
Post subject:  Re: Remus can Horror
Cheers chaps for all the advise I will give this a try again this afternoon.

Col :4roz:
Author:  att [ 18 Sep 2009 17:44 ]
Post subject:  Re: Remus can Horror
"Remus can Horror"

Get a fucking grip man, the can is the least of your horrors......Something here telling me that you are in for an interesting time during the ownership of your Buell :tosser:
Author:  Adam [ 18 Sep 2009 18:07 ]
Post subject:  Re: Remus can Horror
:hehe:
Author:  ist [ 18 Sep 2009 18:55 ]
Post subject:  Re: Remus can Horror
att wrote:
"Remus can Horror"

Get a fucking grip man, the can is the least of your horrors......Something here telling me that you are in for an interesting time during the ownership of your Buell :tosser:


I´m with this guy on that one...it starts off with one little bolt and it ends with big end failure :sad1:
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/