| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Programmable EFI Not Buell https://ukbeg.com/forum/viewtopic.php?f=8&t=2718 |
Page 1 of 1 |
| Author: | Essex [ 22 Sep 2009 19:18 ] |
| Post subject: | Programmable EFI Not Buell |
Any one out there no loads about Programmable EFI ? I know very little and I am building a Race bike for next season using a KTM 690 engine(653cc) it has a basic fuel injection system that is not programmable and there is not anything off the shelf for it either. At the moment any one who uses this engine just ditches the injection and stick a carb on instead. This to me is a step backwards. So the Question is Does any one know of a system that would be suitable to adapt to run on the KTM? or of any aftermarket products that would be usable? |
|
| Author: | thorkill the tall [ 22 Sep 2009 20:56 ] |
| Post subject: | Re: Programmable EFI Not Buell |
You could try something like this. Not all systems allow you to make detailed changes to your fuel maps, etc, so you'll have to hunt around for the make/model that suits your needs. The other downside is the cost. I suggest you are sitting down before checking out the prices. Welcome to modern technology, me ol' mucker 
|
|
| Author: | 03 [ 22 Sep 2009 20:58 ] |
| Post subject: | Re: Programmable EFI Not Buell |
Google for microsquirt. |
|
| Author: | gunter [ 22 Sep 2009 21:36 ] |
| Post subject: | Re: Programmable EFI Not Buell |
 Or the rapid bike module, if a harness is available. |
|
| Author: | Essex [ 23 Sep 2009 19:44 ] |
| Post subject: | Re: Programmable EFI Not Buell |
I found these people and they have said they can help will have a look at the others you have recomended http://www.emeraldm3d.com/ |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|