| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Free spirits set up. https://ukbeg.com/forum/viewtopic.php?f=8&t=359 |
Page 1 of 1 |
| Author: | Nate [ 14 May 2009 19:04 ] |
| Post subject: | Free spirits set up. |
It's been bugging me recently as to why I could not get my free spirits tensioner to move down. I looped some cord through the pully and using my foot could not get it to travel down. I thought it was seized and so took it off. It was not seized, the rose joint was bottomed out and so was not releasing any tension. I have now removed 1/4" of thread and now can depress the top side of the belt and get movement on the tensioner pully. I was wondering what with Pash having trouble with his output shaft why the free spirits thing had not prevented his problem. Have any of you noticed this too? Nate. |
|
| Author: | Maz [ 14 May 2009 19:31 ] |
| Post subject: | Re: Free spirits set up. |
Lost count of the number of times I've posted about this.....even had a massive arguement with Trojan who said I was talking bollox  Free Spirits also said I was talking bollox but I notice that all the new tensioners coming through now, have shorter threads on the adjusters 
|
|
| Author: | Nate [ 14 May 2009 19:48 ] |
| Post subject: | Re: Free spirits set up. |
Yeah well it don't matter what they said Maz cos intelligent observation reveals it's own language. Ok it may take me a little longer to see the bloody obvious but at leist I ain't in denial about it  N. Wish I did better at school too, liest leist hmmm 
|
|
| Author: | pash [ 15 May 2009 00:32 ] |
| Post subject: | Re: Free spirits set up. |
Nate wrote: I was wondering what with Pash having trouble with his output shaft why the free spirits thing had not prevented his problem. No, I cut 5mm off the thread at the time too. Coil binds now rather than the rose joint touching the mounting plate... |
|
| Author: | Nate [ 15 May 2009 14:21 ] |
| Post subject: | Re: Free spirits set up. |
Bollocks  N. |
|
| Author: | pash [ 15 May 2009 16:58 ] |
| Post subject: | Re: Free spirits set up. |
And I forgot to put it in the "How To" Thanks for bringing it up Nate... |
|
| Author: | Lima [ 21 May 2009 01:19 ] |
| Post subject: | Re: Free spirits set up. |
Least 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|