UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
Shifting Woes https://ukbeg.com/forum/viewtopic.php?f=8&t=721 |
Page 1 of 2 |
Author: | zoidberg [ 30 May 2009 20:55 ] |
Post subject: | Shifting Woes |
Having bother changing gear. Mainly 3rd. Takes two good punts to get in and out of. The rest feel quite stiff to change. Clutchless upshifts seem fine 3rd-4th-5th. Possibility of the clutch dragging? 2007 XB12Ss Cheers Dave |
Author: | Bungle [ 30 May 2009 21:00 ] |
Post subject: | Re: Shifting Woes |
Got oil in the 'box? Clutch need adjusting? |
Author: | pash [ 30 May 2009 21:01 ] |
Post subject: | Re: Shifting Woes |
Crack in clutch cover? |
Author: | kevmean [ 30 May 2009 21:02 ] |
Post subject: | Re: Shifting Woes |
hmmmmmm Buell and clutchless gearchanges.............never been a good idea. |
Author: | Norm [ 30 May 2009 21:16 ] |
Post subject: | Re: Shifting Woes |
kevmean wrote: hmmmmmm Buell and clutchless gearchanges.............never been a good idea. x2 And adjust your primary chain. |
Author: | zoidberg [ 30 May 2009 21:23 ] |
Post subject: | Re: Shifting Woes |
anyone got the procedure on how to adjust the primary chain? the clutchless changes were an experiment. |
Author: | pash [ 30 May 2009 21:39 ] |
Post subject: | Re: Shifting Woes |
Primary change adjustment is in the owners manual... Links to electronic versions here http://www.badweatherbikers.com/buell/m ... 1211851392 |
Author: | Adam [ 30 May 2009 21:54 ] |
Post subject: | Re: Shifting Woes |
Norm wrote: kevmean wrote: hmmmmmm Buell and clutchless gearchanges.............never been a good idea. x2 And adjust your primary chain. x3 |
Author: | pash [ 30 May 2009 21:57 ] |
Post subject: | Re: Shifting Woes |
x 4 Unless it is a demo bike... ![]() |
Author: | Norm [ 30 May 2009 22:10 ] |
Post subject: | Re: Shifting Woes |
Stop agreeing with me. This is the tech forum, I'm meant to be deleted not supported when I wander in here. |
Author: | Ash [ 30 May 2009 22:44 ] |
Post subject: | Re: Shifting Woes |
![]() |
Author: | Babybadger [ 01 Jun 2009 15:45 ] |
Post subject: | Re: Shifting Woes |
zoidberg wrote: Having bother changing gear. Mainly 3rd. Takes two good punts to get in and out of. The rest feel quite stiff to change. Clutchless upshifts seem fine 3rd-4th-5th. Possibility of the clutch dragging? 2007 XB12Ss Cheers Dave Change the gearbox oil (genuine HD oil) and check the tension on the primary chain. All should be well after that. |
Author: | gunter [ 01 Jun 2009 16:04 ] |
Post subject: | Re: Shifting Woes |
Was a new primary cover gasket installed lately? I've seen both my bike and two others having had no more axial play in shifter shaft after doing so. Apparently there's a lot of gaskets around which is thinner than before. |
Author: | zoidberg [ 02 Jun 2009 07:00 ] |
Post subject: | Re: Shifting Woes |
gunter wrote: Was a new primary cover gasket installed lately? I've seen both my bike and two others having had no more axial play in shifter shaft after doing so. Apparently there's a lot of gaskets around which is thinner than before. It was actually, it had the primary cover replaced. I'll have a look at the tension and investigate the dimensions of the newer gasket. |
Author: | Babybadger [ 04 Jun 2009 21:13 ] |
Post subject: | Re: Shifting Woes |
Adam wrote: Norm wrote: kevmean wrote: hmmmmmm Buell and clutchless gearchanges.............never been a good idea. x2 And adjust your primary chain. x3 x5 or so...... Why would you want to do clutchless changes on a Buell? Quickest way to kill a gearbox on Buell I think.......expensive experiment.... |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |