UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
x1 frame worrys https://ukbeg.com/forum/viewtopic.php?f=8&t=766 |
Page 1 of 1 |
Author: | chris_sheena [ 01 Jun 2009 13:43 ] |
Post subject: | x1 frame worrys |
my and my x1 had a crash sunday the frame looked ok to start with but on further investigation the point where the forks stop against the frame seems to be dented a little all the welds are still strong and the paint is unmarked around them but the frame where the forks stop againts is bent in a little and the paint seems to be cracked slightly . i know you guys cant see the damage but do you think the bike will be ok as if i go threw the insurance route they will right her off and i aint doing that to my baby |
Author: | Spook [ 01 Jun 2009 15:18 ] |
Post subject: | Re: x1 frame worrys |
Better they write it off than it writes you off. Let ![]() |
Author: | deepsix [ 01 Jun 2009 16:00 ] |
Post subject: | Re: x1 frame worrys |
Contact Toyboy as he knows of abike with nuclear blue frame maybe breaking if you need one. |
Author: | paulalig [ 01 Jun 2009 16:22 ] |
Post subject: | Re: x1 frame worrys |
Might sell you a nuke blue X1 frame if you need one - have had it "in stock" for ages but prolly will never use it ![]() |
Author: | keeper of stumpy [ 01 Jun 2009 21:53 ] |
Post subject: | Re: x1 frame worrys |
My 97 M2's got dents on both sides from a masive tank slapper when it was 6 weeks old. My fault. ![]() |
Author: | tubbs [ 01 Jun 2009 22:54 ] |
Post subject: | Re: x1 frame worrys |
mr_stabby wrote: my and my x1 had a crash sunday the frame looked ok to start with but on further investigation the point where the forks stop against the frame seems to be dented a little all the welds are still strong and the paint is unmarked around them but the frame where the forks stop againts is bent in a little and the paint seems to be cracked slightly . can you post any pics i know you guys cant see the damage but do you think the bike will be ok as if i go threw the insurance route they will right her off and i aint doing that to my baby ![]() i would not worry to much if the frame is true and no cracks in or around welds. |
Author: | chris_sheena [ 01 Jun 2009 22:59 ] |
Post subject: | Re: x1 frame worrys |
will post pics tomorrow |
Author: | retromlc [ 02 Jun 2009 16:30 ] |
Post subject: | Re: x1 frame worrys |
get someone like motoliner,in maidstone,kent,to stick it on a jig to check it's straight,they can inspect it for stress damage too |
Author: | Digger [ 02 Jun 2009 17:09 ] |
Post subject: | Re: x1 frame worrys |
Have you any idea just how far Chris is from Maidstone?????? ![]() |
Author: | retromlc [ 02 Jun 2009 19:25 ] |
Post subject: | Re: x1 frame worrys |
someone like motoliner digger,i'm sure there must be others,can't be that bad,we gotta all drive/ride to manchester to get our spares now ![]() |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |