| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| EBR PREPROGRAMMED or programmable ECM's - do they work ? https://ukbeg.com/forum/viewtopic.php?f=8&t=7704 |
Page 1 of 1 |
| Author: | shudnobeta [ 21 Jul 2010 21:19 ] |
| Post subject: | EBR PREPROGRAMMED or programmable ECM's - do they work ? |
Has anyone tried a EBR 2008-2009 XB12 MODEL PREPROGRAMMED or programmable ECM & if so has it worked ? http://www.ebracing.com/shop/page11.html |
|
| Author: | deepsix [ 21 Jul 2010 22:33 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
Look thru this thread, Neil has one on his bike; might enlighten you? viewtopic.php?f=7&t=6343&start=0 |
|
| Author: | shudnobeta [ 22 Jul 2010 16:17 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
deepsix wrote: Look thru this thread, Neil has one on his bike; might enlighten you? viewtopic.php?f=7&t=6343&start=0 thanks for the linky shallow1. Neil appears to be happy with his ECM - any others out there ???????????????? |
|
| Author: | Dirty John [ 22 Jul 2010 17:16 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
yes and it works just fine thank you. |
|
| Author: | shudnobeta [ 25 Jul 2010 18:57 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
...........are you watching this thread Tubbs - two satisfied customers for EBR's ECM's !......... this is becoming a trend ! My 08 Uly goes well enough but is really lively from 5K rpm when it should of course be like that from the off; it also pops like an inglorious basterd. Hence my interest. |
|
| Author: | pash [ 25 Jul 2010 22:04 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
shudnobeta wrote: ...........are you watching this thread Tubbs - two satisfied customers for EBR's ECM's !......... this is becoming a trend ! My 08 Uly goes well enough but is really lively from 5K rpm when it should of course be like that from the off; it also pops like an inglorious basterd. Hence my interest. 
|
|
| Author: | gunter [ 26 Jul 2010 11:35 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
And if someone get's a new EBR ECM - could you please, please fetch me an eeprom copy *before* it's synchronized with the IC? Thanks! |
|
| Author: | Cornerthief [ 02 Aug 2010 17:22 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
EBR ECM + free spirits headers and pipe 
|
|
| Author: | ph4824 [ 03 Aug 2010 22:27 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
shudnobeta wrote: Has anyone tried a EBR 2008-2009 XB12 MODEL PREPROGRAMMED or programmable ECM & if so has it worked ? http://www.ebracing.com/shop/page11.html I made a few enquiries with EBR but they didn't have a map for my Free Spirits exhaust. They advised me buying their ECM + tuning software + dyno runs = too much money! I contacted dris @ twin motorocycles and was nearly going to purchase one of his ECMs but his prices are alot more expensive than EBR. In the end I took a chance on a Free Spirits TFI which has livened up my bike to say the least. Blackbird rode my bike for a few miles last week and he noticed how responsive it was! No doubt it's not as good as a full on tuned eCM but for me I needed to spend probably about £700+ which was not an option! If EBR did a ECM for my exhaust I may be very tempted to buy one though! |
|
| Author: | shudnobeta [ 27 Aug 2010 22:18 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
Fitted a preprogrammed ECM last week, immediately after taking it for a spin after its first 10K service. The ECM is a big improvement. Noticably smoother, healthier feel to the engine. More air intake noise. Popping - which was big-time - nearly all gone. Low range faster. Mid range 3-5K still not perfect. Top range faster and seems more comfortable in the higher rev range. All in all a big improvement and close to how they should of come outa the factory - the programmable one would probably be better still, but thats too much dosh for me. |
|
| Author: | gunter [ 28 Aug 2010 06:49 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
shudnobeta wrote: the programmable one would probably be better still, but thats too much dosh for me. 50 quid, donated to Papworth Hospital is too much? 
|
|
| Author: | shudnobeta [ 28 Aug 2010 11:57 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
gunter wrote: shudnobeta wrote: the programmable one would probably be better still, but thats too much dosh for me. 50 quid, donated to Papworth Hospital is too much? pm for you Gunter |
|
| Author: | gunter [ 28 Aug 2010 15:01 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
shudnobeta wrote: pm for you Gunter Not really ... |
|
| Author: | shudnobeta [ 30 Aug 2010 21:01 ] |
| Post subject: | Re: EBR PREPROGRAMMED or programmable ECM's - do they work ? |
gunter wrote: shudnobeta wrote: pm for you Gunter Not really ... No really |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|