I've never split the cases on an Evo type motor, the original sealer (that gets squidged out by the factory using too much and not peeling it off after assembly
) appears to be a Silicone based product - unlike Hylomar.
| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| Gasket / Sealant https://ukbeg.com/forum/viewtopic.php?f=8&t=903 |
Page 1 of 1 |
| Author: | Robs [ 07 Jun 2009 10:47 ] |
| Post subject: | Gasket / Sealant |
anyone got any recommendations for a suitable gasket / sealant to use when joining crankcase halves ? e.g. hylomar universal blue |
|
| Author: | Adam [ 07 Jun 2009 11:30 ] |
| Post subject: | Re: Gasket / Sealant |
I've never split the cases on an Evo type motor, the original sealer (that gets squidged out by the factory using too much and not peeling it off after assembly ) appears to be a Silicone based product - unlike Hylomar.
|
|
| Author: | Beef [ 07 Jun 2009 13:49 ] |
| Post subject: | Re: Gasket / Sealant |
Quote: loctite 518, seals up to 10 thou, loctite 518, seals up to 10 thou, But its already 2009  
|
|
| Author: | a10ken [ 08 Jun 2009 09:12 ] |
| Post subject: | Re: Gasket / Sealant |
yambond/kawabond/suzukibond. all available from any jap dealer.it,s wat the factorys use and i have found it the best by a mile.. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|