| UK Buell Enthusiasts Group https://ukbeg.com/forum/ |
|
| How important is the IAT sensor? https://ukbeg.com/forum/viewtopic.php?f=8&t=9129 |
Page 1 of 1 |
| Author: | coppersaucepipe [ 21 Nov 2010 14:27 ] |
| Post subject: | How important is the IAT sensor? |
My engine management light came on this morning and the display reported an IAT Sensor error. The AT reading was flipping between -21C and +26C. The bike is still running ok, so what if any impact does the IAT sensor have on the fueling? |
|
| Author: | pash [ 21 Nov 2010 19:49 ] |
| Post subject: | Re: How important is the IAT sensor? |
As GM says. It's important, however the closed loop control will eventually correct for errors, but at the expense of rough running. I'd check the connectors first, maybe silicon grease them... |
|
| Author: | coppersaucepipe [ 22 Nov 2010 13:48 ] |
| Post subject: | Re: How important is the IAT sensor? |
Thanks. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|