UK Buell Enthusiasts Group
https://ukbeg.com/forum/

reverso
https://ukbeg.com/forum/viewtopic.php?f=8&t=9157		 Page 1 of 4
Author:  albert666 [ 24 Nov 2010 19:22 ]
Post subject:  reverso
this is my latest project along with all the others
xb reverso system, just need to do the inlet and i'll give it a go :)
Image
Author:  deepsix [ 24 Nov 2010 19:35 ]
Post subject:  Re: reverso
You sure that's not for a Tuba :roll:
Author:  pash [ 24 Nov 2010 19:44 ]
Post subject:  Re: reverso
Ooh, fancy!
Author:  kevmean [ 24 Nov 2010 19:59 ]
Post subject:  Re: reverso
deepsix wrote:
You sure that's not for a Tuba :roll:


I think the shock might just get in the way abit on a tuber ;)
Author:  deepsix [ 24 Nov 2010 20:28 ]
Post subject:  Re: reverso
kevmean wrote:
deepsix wrote:
You sure that's not for a Tuba :roll:


I think the shock might just get in the way abit on a tuber ;)


http://cominganarchy.com/2008/02/28/beh ... -war-tuba/
Author:  daywalker [ 24 Nov 2010 22:00 ]
Post subject:  Re: reverso
How is it going to mount on the bike?
I would think it will be loud as well. The remus uses two cans of that size. Can't wait to here a sound clip. 8-)
Author:  supremesoundz [ 24 Nov 2010 22:09 ]
Post subject:  Re: reverso
looks awsome would like to hear it and see it on a xb
Author:  rob.bruce [ 25 Nov 2010 09:19 ]
Post subject:  Re: reverso
I know this may sound a bit daft but........ wouldnt the forward motion of the bike hamper the escape of the exhaust gases ? I assume the can comes out at the front ?

:headbang:
Author:  Motorrad [ 25 Nov 2010 16:09 ]
Post subject:  Re: reverso
rob.bruce wrote:
I know this may sound a bit daft but........ wouldnt the forward motion of the bike hamper the escape of the exhaust gases ? I assume the can comes out at the front ?

:headbang:

Not any more than the other reverso pipe that's available.
Author:  Adam [ 25 Nov 2010 17:29 ]
Post subject:  Re: reverso
greasemonkey wrote:
rob.bruce wrote:
I know this may sound a bit daft but........ wouldnt the forward motion of the bike hamper the escape of the exhaust gases ? I assume the can comes out at the front ?

:headbang:

think about it Rob, the outlet is at 90 degrees to the airflow of the bikes tavel, if anything it will create a partial vacuum in front of the outlet :idea:



:yt: Mr Bernoulli lOl
Author:  pash [ 25 Nov 2010 17:45 ]
Post subject:  Re: reverso
Hmmm, dunno about that... However, suffice to say it will be no different that the stock exhaust...
Author:  albert666 [ 25 Nov 2010 18:08 ]
Post subject:  Re: reverso
i'm working on the mounting brackets, hence why i needed the rear ally bracket although i think theres a way round that, yes it'll probably be loud, but thats what someone asked me to build :)
Author:  ant69 [ 02 Dec 2010 13:33 ]
Post subject:  Re: reverso
looking good there albert;

if i didnt already have one of your cans, i would love to give one of those a try; dont think theres any danger of it being too quiet.

curious to see how it compares on a dyno to your standard can when its done. ( form over function ? )

P.S. those internal baffle blanking tubes you did for me are a winner - the 50% one gives it just enough of a lift. ( and its still loads quieter than my guzzi )
Author:  yourguitarhero [ 02 Dec 2010 19:08 ]
Post subject:  Re: reverso
Hmmmm, might have to get one of them off you in the spring!
I take it you're going to be testing it on the dyno etc?
Author:  albert666 [ 02 Dec 2010 21:00 ]
Post subject:  Re: reverso
first fitment tonight :)
still gotta work out brackets for the chin spoiler etc, it will go on the dyno as well.
this one will be up for sale as well as it was supposed to be going to a guy in the states but he bailed on me, so the xmas project is....drink loads, remove old headers fit my new equal length headers, dyno run with my usual can then this one :)
Image
Page 1 of 4 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/