It is currently 01 Dec 2024 12:39

All times are UTC




Post new topic  Reply to topic  [ 14 posts ] 
Author Message
PostPosted: 21 Jul 2010 21:19 
Has anyone tried a EBR 2008-2009 XB12 MODEL PREPROGRAMMED or programmable ECM & if so has it worked ?

http://www.ebracing.com/shop/page11.html


Top
   
PostPosted: 21 Jul 2010 22:33 
Offline
User avatar

Joined: 06 May 2009 16:03
Posts: 4389
Current ride: S1w X1 1125CR
Location: NNW of Sarfampton
Look thru this thread, Neil has one on his bike; might enlighten you?

viewtopic.php?f=7&t=6343&start=0

_________________
I'm a Hornithologist, I get excited by exotic birds.........


Top
PostPosted: 22 Jul 2010 16:17 
deepsix wrote:
Look thru this thread, Neil has one on his bike; might enlighten you?

viewtopic.php?f=7&t=6343&start=0


thanks for the linky shallow1. Neil appears to be happy with his ECM - any others out there ????????????????


Top
   
PostPosted: 22 Jul 2010 17:16 
Offline

Joined: 06 May 2009 17:47
Posts: 132
yes and it works just fine thank you.


Top
PostPosted: 25 Jul 2010 18:57 
...........are you watching this thread Tubbs - two satisfied customers for EBR's ECM's !......... this is becoming a trend !

My 08 Uly goes well enough but is really lively from 5K rpm when it should of course be like that from the off; it also pops like an inglorious basterd. Hence my interest.


Top
   
PostPosted: 25 Jul 2010 22:04 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
shudnobeta wrote:
...........are you watching this thread Tubbs - two satisfied customers for EBR's ECM's !......... this is becoming a trend !

My 08 Uly goes well enough but is really lively from 5K rpm when it should of course be like that from the off; it also pops like an inglorious basterd. Hence my interest.

:roll:

_________________
08 Specialized Langster


Top
PostPosted: 26 Jul 2010 11:35 
Offline
User avatar

Joined: 06 May 2009 18:18
Posts: 1512
Current ride: CB1300, Z750, R1200
Location: Esslingen/Neckar, Germany
And if someone get's a new EBR ECM - could you please, please fetch me an eeprom copy *before* it's synchronized with the IC?

Thanks!

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett


Top
PostPosted: 02 Aug 2010 17:22 
Offline

Joined: 22 Jan 2010 11:35
Posts: 17
Location: The Netherlands
EBR ECM + free spirits headers and pipe :yup:


Top
PostPosted: 03 Aug 2010 22:27 
shudnobeta wrote:
Has anyone tried a EBR 2008-2009 XB12 MODEL PREPROGRAMMED or programmable ECM & if so has it worked ?

http://www.ebracing.com/shop/page11.html


I made a few enquiries with EBR but they didn't have a map for my Free Spirits exhaust. They advised me buying their ECM + tuning software + dyno runs = too much money! I contacted dris @ twin motorocycles and was nearly going to purchase one of his ECMs but his prices are alot more expensive than EBR.

In the end I took a chance on a Free Spirits TFI which has livened up my bike to say the least. Blackbird rode my bike for a few miles last week and he noticed how responsive it was! No doubt it's not as good as a full on tuned eCM but for me I needed to spend probably about £700+ which was not an option!

If EBR did a ECM for my exhaust I may be very tempted to buy one though!


Top
   
PostPosted: 27 Aug 2010 22:18 
Fitted a preprogrammed ECM last week, immediately after taking it for a spin after its first 10K service.
The ECM is a big improvement. Noticably smoother, healthier feel to the engine. More air intake noise. Popping - which was big-time - nearly all gone. Low range faster. Mid range 3-5K still not perfect. Top range faster and seems more comfortable in the higher rev range. All in all a big improvement and close to how they should of come outa the factory - the programmable one would probably be better still, but thats too much dosh for me.


Top
   
PostPosted: 28 Aug 2010 06:49 
Offline
User avatar

Joined: 06 May 2009 18:18
Posts: 1512
Current ride: CB1300, Z750, R1200
Location: Esslingen/Neckar, Germany
shudnobeta wrote:
the programmable one would probably be better still, but thats too much dosh for me.


50 quid, donated to Papworth Hospital is too much? :o :roll:

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett


Top
PostPosted: 28 Aug 2010 11:57 
gunter wrote:
shudnobeta wrote:
the programmable one would probably be better still, but thats too much dosh for me.


50 quid, donated to Papworth Hospital is too much? :o :roll:


pm for you Gunter


Top
   
PostPosted: 28 Aug 2010 15:01 
Offline
User avatar

Joined: 06 May 2009 18:18
Posts: 1512
Current ride: CB1300, Z750, R1200
Location: Esslingen/Neckar, Germany
shudnobeta wrote:
pm for you Gunter


Not really ...

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett


Top
PostPosted: 30 Aug 2010 21:01 
gunter wrote:
shudnobeta wrote:
pm for you Gunter


Not really ...


No really


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 14 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited