......that'll be theX2086.1AM kit

When I put the 1125 away last weekend, the clutch was fine. Got the bike out today and the clutch felt very light. Put it into gear and there was a sickening crunch, worked the lever a couple of times and there was no clutch at all
Took the reliable Ducati (hydraulic clutch ) out instead
The 1125 has probably done less than 1k miles since the kit was installed and I can't understand why the fluid has drained while the bike stood still
Fingers crossed the diaphram is Dot 4 resistant
The Warranty expired in March so I guess I'm stuffed there, anyone know the part numbers for the piston, sleeve and spherical nut seals in the 'upgrade' kit since I only have the '08 parts book?

_________________
If your dreams don't scare you, they are not big enough.

have a look on badweb. theres a kit available, but some reckon the individual parts work out cheaper, and quicker to get

heres one

http://www.badweatherbikers.com/buell/m ... 1288411786

or

http://www.badweatherbikers.com/buell/m ... 1287699435

bottom of the second link, froggy lists some part no's


X1086.3AM HYDRAULIC PISTON KIT Retail Price:$80.45
CR0001.3AM PISTON LINING, 22X17,8X4,0 Retail Price:$18.70
CR0002.3AM PISTON LINING, 41X36,8X4,0 Retail Price:$21.80
X0087.3AM SLEEVE Retail Price:$87.70
CF0007.1AMA O-RING DIN 3771-45X2-N Retail Price:$1.69 (2 needed, $3.38 total)

My total comes out to $212.03, while the entire kit is:
X2086.1AM HYDRAULIC PISTON & CYLINDER KIT Retail Price:$232.00

So yes, you save $20 buying every separate, and thats hoping I didn't miss a piece.

The prices on parts do fluctuate, so sometimes kits of a bunch of parts can be cheaper or more expensive than individual parts.

_________________
My Smugmug Photos

Adam, it may be worth speaking to HDB, surely they should warranty the repair for a further 2 years ?

If that fails you could try trading standards ...

... in the meantime I'll just wait for mine to go too.

IIRC there's a thread on BWB about a couple of failures of the replacement kit.

Surely an investigation as to why it failed and a solution engineered would be better...

Tis only a piston and seal...

_________________
08 Specialized Langster

The price of the kit on Jersey HD -

http://www.jerseyh-d.com/product/produc ... ?id=258343

if you use the code birthday2 at the checkout it currently gives 10 % discount.

Get the failed parts to me and I'll design/Spondon 440 will make something that'll work

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

but then froggy says.

http://www.badweatherbikers.com/buell/m ... 1286593226

_________________
My Smugmug Photos

Found the BWB thread -

http://www.badweatherbikers.com/buell/m ... 1288411786

_________________
If your dreams don't scare you, they are not big enough.