I don't suppose anybody has a pair of throttle cables that they are prepared to part with ? IIRC they are the same for both R and CR with the clubman bars - so perhaps somebody has a set knocking about if they've upgraded to high bars.

The part numbers are N0307A.1AM and N0308A.1AM - don't know if they are the same as XB models though.

Having trouble with my R throttle sticking - looks to be the cables at fault.

PM me if you still need Sportster

_________________
A12 XBS, B 15 OUT !!

I had same problem, found to be the rubber boot that goes round the throttle bodies/bottom of airfilter box. It was rubbing the right hand side butterfly link arms towards the front of the bike.

But only after alot of fiddling with the cable adjustment did i notice it.

Trim the underside of the rubber lip with a knife, I could see a very slight rub mark, the boot is shaped already to avoid this happening, but obviously it's a close tolerance and mine had somehow dropped half a mm or so ?

Let me know if this works, 5 minute job, probably going to be another 1125 quirk