It is currently 29 Nov 2024 21:54

All times are UTC




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: 02 Jul 2011 22:50 
Offline
User avatar

Joined: 02 Jul 2011 19:28
Posts: 15
Current ride: buell xb12s
Location: west sussex
HI GUYS N GIRLS?,THIS IS PROBABLY A NO BRAINER FOR SOME OF YOU HERE BUT.MY ECU 10AMP FUSE KEEPS BLOWING HAD A RECENT MOT VIA HARLEY AND THEY CHECKED FOR FAULT AND TOLD ME COULD BE AIR TEMP SENSOR??.CAN ANYONE GIVE ME A POSSIBLE SOLUTION AND IF I CAN BUY AN AFTERMARKET OPTION LIKE A RECENT FLASHER RELAY SWITCH I BOUGHT FROM AMAZON FOR A FRACTION OF THE COST THAT HARLEY WHERE QUOTING!!!.LOOK FORWARD TO YOUR RESPONSES AND SOME GOOD OL LIKE MINDED BUELL NUTTERS ;)


Top
PostPosted: 03 Jul 2011 08:41 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10976
Current ride: X1 2001
Location: southampton
10amp fuse blowing :shock:
check the cables aren't chaffed , burnt or broken an flapping around
sounds more like a short to earth give all the electrics a good looking at , for any burn marks

what the dealer may have done is plug in a diagnostic tester
which says problem with sensor X
but this could be the cabling to X rather than X itself

_________________
Feros Ferio


Top
PostPosted: 04 Jul 2011 19:37 
Offline
User avatar

Joined: 02 Jul 2011 19:28
Posts: 15
Current ride: buell xb12s
Location: west sussex
ttttthanks guy for your replies and the hap hap happy welcome.if anyone else can help with some ideas would be v v gratefull :clap: lOl


Top
PostPosted: 04 Jul 2011 19:53 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8643
Location: Manchester
:wtbk:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 04 Jul 2011 20:48 
Offline
User avatar

Joined: 02 Jul 2011 19:28
Posts: 15
Current ride: buell xb12s
Location: west sussex
Doh!! the bike is xb12s(06) by the way. :oooops:


Top
PostPosted: 04 Jul 2011 21:20 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8643
Location: Manchester
Check the ecm harness where it passes by the battery negative terminal........most chaff though there :idea:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 05 Jul 2011 18:18 
Offline
User avatar

Joined: 02 Jul 2011 19:28
Posts: 15
Current ride: buell xb12s
Location: west sussex
cool thanxs,will try when its not pidling down here.


Top
PostPosted: 20 Jul 2011 08:26 
Offline
User avatar

Joined: 02 Jul 2011 19:28
Posts: 15
Current ride: buell xb12s
Location: west sussex
well guys n girls you have possibly saved my sanity,had a dry day and stripped the bike down to try and find electrical fault and followed ur advise to look for damaged cable/fraid wire and found 7 yes 7 slightly damaged sections that had worn through!!.O.M.G!!. so dispatched the old electrical tape and patched up the problems.and went out on a good 3hr blast in all sorts of conditions.(free riding/town stop n start traffic/stationary)and fingers crossed no blown fuse!! and strangely Im sure the old girl was purring or should I say throbbing like never before.so fingers still crossed still I cant thank you enough for my sanity and my very empty wallet.cant imagine what this might have cost me if I had to have a garage find a repair this!!. thank you sooooooo much. :yup: :worthy: :worthy:


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited