It is currently 30 Nov 2024 02:36

Unanswered topics | Active topics


Home » Board index » The Bike Bit » Technical Forum

All times are UTC



Post new topic  Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Beef
 Post subject: Main Jet
PostPosted: 22 Jun 2011 18:01 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
I need to downsize the main jet, Pash deems FUBAR is running 17% richer out here in Canada due to elevation.

I have a 162.5 main jet in currently, do I downsize big to say 152 or small to say 160?

I have no idea how much difference you get from jet to jet.

I don't get much time with my bike, so I am hoping to swap once and be as near as dammit!

ANY advice please

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
  Send private message  
Reply with quote  
restone
 Post subject: Re: Main Jet
PostPosted: 22 Jun 2011 18:52 
Offline

Joined: 25 Apr 2010 16:52
Posts: 1190
Current ride: S1wl IronhorseSunday
Location: north wales
I'd try 155 do a plug chop then go up to 160 if plug looks a bit pale (lean).
If you've got a mikuni its really easy 17mm spanner whip drain plug off bottom of carb, stick something under to catch the fuel, flat head spanner to change the jet, then reverse, be gentle the jet is soft brass ;) :yup:
I've got both sizes spare if you want em.
Rich

_________________
Buelling is exhillarating
But downhill bike racing is so terrifying it makes your arse grow teeth
Top
  Send private message  
Reply with quote  
chris(madrid)
 Post subject: Re: Main Jet
PostPosted: 22 Jun 2011 20:30 
Offline
User avatar

Joined: 15 May 2009 17:34
Posts: 3567
Location: The borders of insanity
If it's that rich - you may need to lean out the midrange a bit too.

_________________
Sept 2017. Email will find me.
Top
  Send private message  
Reply with quote  
Adam
 Post subject: Re: Main Jet
PostPosted: 22 Jun 2011 21:33 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
chris(madrid) wrote:
If it's that rich - you may need to lean out the midrange a bit too.



Aye, that's where I'd look at too.

_________________
If your dreams don't scare you, they are not big enough.
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: Main Jet
PostPosted: 22 Jun 2011 21:39 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
I would go little by little, no big jumps.

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Beef
 Post subject: Re: Main Jet
PostPosted: 22 Jun 2011 22:20 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
I dropped the needle 2 rungs and mid range seems good.
Will try 155 and see what it's like.......didn't realise you could get at the main jet through the drain plug-I've been taking the carb off each time :!: :roll: lOl lOl
I have a 155, 157 and 160.

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
  Send private message  
Reply with quote  
Beef
 Post subject: Re: Main Jet
PostPosted: 21 Jul 2011 17:12 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
OK.....now I have a selection of main jets to try, when I downsize, will that mean I will need to raise the needle again, or should it be ok?

Any advice from anyone who's set up a carb before would be appreciated :)

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: Main Jet
PostPosted: 21 Jul 2011 17:45 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
The raising and lowering of the needle only affects the mixture where the tapered portion is in the orifice of the emulsion tube. This is at around 1/2 to 3/4 throttle. Main jet controls 3/4 to full throttle... Since the emulsion tube is fed by the main jet, reducing the main jet size will have a small effect on the region influenced by the taper.

In summary, put the needle back to the middle position, get it running right at wide open throttle, then address the needle again.

Surely there are some local Buell riders who can tell you what they are running.

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Adam
 Post subject: Re: Main Jet
PostPosted: 21 Jul 2011 20:33 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
pash wrote:
The raising and lowering of the needle only affects the mixture where the tapered portion is in the orifice of the emulsion tube. This is at around 1/2 to 3/4 throttle. Main jet controls 3/4 to full throttle... Since the emulsion tube is fed by the main jet, reducing the main jet size will have a small effect on the region influenced by the taper.

In summary, put the needle back to the middle position, get it running right at wide open throttle, then address the needle again.

Surely there are some local Buell riders who can tell you what they are running.



Yep. On reflection, that seems like very sound advice. I was going at it arse about face lOl

_________________
If your dreams don't scare you, they are not big enough.
Top
  Send private message  
Reply with quote  
Beef
 Post subject: Re: Main Jet
PostPosted: 22 Jul 2011 03:54 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
pash wrote:
Since the emulsion tube is fed by the main jet, reducing the main jet size will have a small effect on the region influenced by the taper.


Thanks Pash, that was they key bit I was unsure of :yup:

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
  Send private message  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 10 posts ] 

Home » Board index » The Bike Bit » Technical Forum

All times are UTC

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited