......after aprox. 1 hour

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

1 Hour, 7 minutes and 32 seconds, according to my notes.

_________________
I started out with nothing and still got most of it left.

Well, rocker covers are back on as well as all the rest of the gubbins, as all was well with push rods and rockers, but the noise is still there. However, after listening to it and reading a thread on here about a rattle on a XB, I may have a dose of the Dons (lazy lifter) or summat loose about the engine. I'll check the carb and filter bits first, as well as the oil and see what happens.

cheers,
fred