just installed led flashers,where can i get the recommended(ukbuell forum) ep36 quick in the uk.think mines gone for a burton!?.one minute they were working now dead.have checked for bad/dry joints and the led"s flash when i arm the alarm but not when i use the indicators.

Have you tried your local car spares dealers ? I thought that the flasher relays were pretty generic ...

Not these days..... used to be only a couple of types (two pin and three pin, bi-metallic) but they're all electRONIC and model-specific now...

_________________
'98 M2 Razorback, it's a keeper.

M&P. heres one for two pin they have three pins too.http://www.mandp.co.uk/productinfo/823278/Spares/Indicator-Relays/Economy

Ecomoy might not be a good deal.

I am sure I have read somewhere that L.E.D indicators need special flasher units ?

Try good old E-bay ?

Mike.

IxV=W
or
Amps x Volts =Watts

why they don't sell the indicators as a kit with a flasher relay

mind you if you stay away from the bling , an stick with the standard indicators
it saves faffing about

_________________
Feros Ferio

Are you replacing all 4 indicators with LED? If 2 are staying standard, there may be enough load on those to keep the OEM type blinking at normal rate.
Otherwise, another option is to use OEM unit and install resistors on wiring for LED indicators (in parallel, I believe, not inline) - the relay reads the "proper" load and blink rate stays the same.

Not sure that the right automotive relay wouldn't do the trick also, though. Some have used this one for example (sorry for the US reference).

_________________
2006 XB12Ss..... 1998 S1W..... 1996 S2T
We do not need the help of our friends so much as confidence that they will help us when we need it. –Epicurus

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

hi guys the oxford led's i bought came with a timing adjust lec'y blk box and they worked for about an hour on the road then died,wondering if the stock relay in the front cowling is unhappy with the led set up and is just throwing its toys out of the pram and cant cope so just shuts down.wondering if i get a newer version specificaly for led's ?

Tried this on mine, works fine.

http://www.buellxb.com/Buell-XB-Forum/D ... lasher-mod

Cheers, Richard.