Once again after washing the 1125 I had a left hand indicator flashing which would not turn off, quite annoying really as I wanted to take a spin to air it off before it froze overnight

I could say with some confidence that the ingress must have been in the indicator switch as spraying WD in there and nowhere else had the desired effect.

Plastic bag next time

Pressure washed or soapy sponge ............................if the former don't ...if the latter try spraying inside the switch with ACF50

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Bucket and soapy sponge Kev and just my thoughts bar switch as opposed to ignition switch.

ACF50 is excellent for spraying in switches connectors etc to keep out moisture and a great corrosion inhibitor as well ............once dry take the switch housing off the bars and give a liberal spray inside

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Have 1125's been fitted with infamous 1980 CEV "liquorice all sort" switchgear then?.

Ah no hang on - WD40 helps little when those go wonky. You replace them.

_________________
Sept 2017. Email will find me.