I have a catch can on the X1, been on since i bought it. The pipe court the exhaust and now has a hole in it, replace or get rid of catch can altogether ? if i get rid where do i reposition the pipe. If i keep it does it need moving ( the pipe ) as someone said it's kinking down and may cause blockage! Think if it's not required then would like to bin it, just need some advise please.

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

Run the breathers up over the engine into a T piece and then back down the left hand side so that the end of the pipe is near the exhaust outlet and let the exhaust blow the crap away from the bike

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

Can only see one breather kev, have a look at pics, and if you have any to look at to give me a clue. Cheers .

_________________
No 1: X1 Lightning.2000. Fully Mazed
No 2: KTM 1290R Superduke SE

The world maybe round but you can still find the Edge.

You'd be better getting two seperate breather fittings instead of that link pipe that joins the heads , then take the individual pipes up under tha tank to a y piece

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

What is wrong with the link pipe Kev?

Personally I would use allen bolts to hold the bracket on and fit XB rocker covers.

_________________
08 Specialized Langster

XB rocker covers are definitely the best solution as per muffins set up .............I just think those link pipes don't really have enough height and volume in them .
What is the cost of a pair of xb covers nowadays?

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.