have just removed my pilion pegs and was replacing the hex screws - the front one of each side has gone back in and is sitting flush with the frame but the back one of each side seems to be sticking out slightly beyond the undertray - should the back 2 be flush with the frame as well? or will that poke into stuff above the exit hole?
cheers
aks

They will stick out as they are not threaded all the way to the head as they pillion peg hangers are thicker on one mounting point than the other. I just use the sticking out section to attach a bungie to when strapping on my rear pack

_________________
Buell S1
Buell S3 (Topless for now)
Buell XB12S
Piaggio X8 400ie
Yamaha XTZ750 Super Tenere (x2)
Suzuki GSXR750WR
BSA B441VS
FJR1300

Cool