It is currently 16 Nov 2024 19:15

All times are UTC




Post new topic  Reply to topic  [ 75 posts ]  Go to page Previous 1 2 3 4 5 Next
Author Message
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 18 Aug 2012 23:33 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
There's some sound advice from :maz:

This what I found in a motor that had only previously been apart by a dealer. The pushrod was so bent, I could pass a 3mm drill bit under it :shock: I also found remnants of a valve guide in the exhaust :o (I had to saw the pipe up to fish it out :roll: )
Otherwise, the motor was barely run in lOl


Image

Image

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 00:17 
Offline
User avatar

Joined: 19 May 2009 09:14
Posts: 235
Current ride: XL1250S + MT-09
Location: Helm's Deep, Norfolk
This week, I bought a front brake light switch for my Sporty - £12.01 + £2 P&P Drag Specialties item from Hogparts UK.
List price for the genuine HD item from Jersey HD is £59.10. If you add VAT to that, it'll bring the price to £70.92 - just under six times what I paid.

I'm not entirely sure how the :shut: they justify that price for a simple electrical switch. :evil:


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 00:29 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
I stock those switches at £7.50 lOl

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 06:29 
Offline
User avatar

Joined: 06 May 2009 13:55
Posts: 4508
Current ride: GTR1000 Rocket,550GT
Location: Joondalup
Maz wrote:
I stock those switches at £7.50 lOl


But petrol to drive from Norfolk and back would eat into the saving a bit lOl

_________________
Wear the fox hat


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 09:00 
Offline
User avatar

Joined: 07 Nov 2011 18:10
Posts: 4177
Current ride: Buell ulysses
Location: Telford
Maz wrote:
.....and if peeps are gonna be fitting these gears themselves, we'd better organise a group discount on valves, guides and pushrods lOl


:yt:
it does worry me at times some of the basic mechanical question asked on this forum by people undertaking repairs to there bikes .
:maz: you must have the patience of a saint, when they turn up with their bike in bits after they tried and failed

_________________
Buell Ulysses XB12X 06/08


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 09:05 
Offline

Joined: 08 Apr 2011 19:13
Posts: 321
Current ride: Tl1000s
Location: worthing west sussex
How much does it cost then to have this mod supplied and fitted then?


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 17:01 
Offline

Joined: 08 Jun 2010 16:34
Posts: 767
Current ride: m2 cyclone
Location: leicester
ignorance is bliss . i bought a new gear from blackbear last saturday, though a bit pricey i needed it. then the reality comes out. keep off the forum lol :sad1:


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 18:32 
Offline
User avatar

Joined: 07 May 2009 09:29
Posts: 950
Location: Pig On The Wall Country
barney wrote:
Maz wrote:
.....and if peeps are gonna be fitting these gears themselves, we'd better organise a group discount on valves, guides and pushrods lOl


:yt:
it does worry me at times some of the basic mechanical question asked on this forum by people undertaking repairs to there bikes .
:maz: you must have the patience of a saint, when they turn up with their bike in bits after they tried and failed



It's lack of advice as no one is telling you how the valves or pushrods can get knackered !!!
It's all about bleeding the hydraulic adjusters down before the bike is started

People do like to have a go themselves and when i did my rear rocker gasket a few years a go i was a bit daunted by doing it and also swopping the swingarm etc and to tell you the truth i was spurred on by hecklers on here .....
I think everyone else has the patience of a saint when reading all the negative shite :maz: puts up :ner:

_________________
Should Have Stuck To making Tubers


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 18:42 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Quote:
It's lack of advice as no one is telling you how the valves or pushrods can get knackered !!!


It's been done to death......if you use the search facility, you'll find that I and several others have explained the proceedure several times :roll:

.......and it's far more complex than letting the lifters bleed down before starting the engine :roll:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 21:41 
Offline
User avatar

Joined: 08 Apr 2010 20:05
Posts: 623
Location: West Country
bueller ball breaker wrote:
I think everyone else has the patience of a saint when reading all the negative shite :maz: puts up :ner:


:rotfl:

_________________
Buell X1 PBS


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 22:02 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Hmmm.......negative or realistic/brutally honest to the point that it actually impacts on my income etc ?

Lets try this another way.......you explain what you do for a living or maybe something you're expert at/passionate about etc......dont forget to mention all the pros/cons etc......and then I'll try to tell YOU where you're going wrong and why you just dont get it etc........

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 19 Aug 2012 22:23 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Yawn...

I have posted a parts list and scope of job here:

viewtopic.php?f=8&t=15307

Feel free to pick me up and anything I have missed...

_________________
08 Specialized Langster


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 20 Aug 2012 00:09 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Here's the thing.......I realise a lot of peeps around this place think I'm an arsehole and I've been told as much to my face on many occaisions lOl
I reckon that instead of posting my pearls of wisdom/shite all over this place, I should instead just post up a blog/daily diary with pix of what occurs at my shop :idea:
This way peeps could draw their own conclusions without me saying a word .......today, for example, was yet another groundhog day.......yet another XB engine stripped with both its pistons wedged between the flywheels, flailing conrods bent beyond recognisition having destroyed cylinders, heads and crankcases, bent pushrods, valves, broken guides, trashed oil pump, etc. etc......another day in Buell world for me and another day in denial/paradise for the rest of you :)

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 20 Aug 2012 06:28 
Offline
User avatar

Joined: 06 May 2009 13:55
Posts: 4508
Current ride: GTR1000 Rocket,550GT
Location: Joondalup
Maz wrote:
.......yet another XB engine stripped with both its pistons wedged between the flywheels, flailing conrods bent beyond recognisition having destroyed cylinders, heads and crankcases, bent pushrods, valves, broken guides, trashed oil pump, etc. etc......another day in Buell world for me and another day in denial/paradise for the rest of you :)


You see Buells in the same way an A & E nurse sees bikers. In your job you inevitably see far more broken ones than most of us do lOl

_________________
Wear the fox hat


Top
 Post subject: Re: Thanks H-D.....NOT
PostPosted: 20 Aug 2012 06:53 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Bonzo wrote:
Maz wrote:
.......yet another XB engine stripped with both its pistons wedged between the flywheels, flailing conrods bent beyond recognisition having destroyed cylinders, heads and crankcases, bent pushrods, valves, broken guides, trashed oil pump, etc. etc......another day in Buell world for me and another day in denial/paradise for the rest of you :)


You see Buells in the same way an A & E nurse sees bikers. In your job you inevitably see far more broken ones than most of us do lOl


But ER, Holby City and Casualty are still popular...

I prefer Coast and Balls of Steel myself...

_________________
08 Specialized Langster


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 75 posts ]  Go to page Previous 1 2 3 4 5 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited