It is currently 28 Sep 2024 16:32

Unanswered topics | Active topics


Home » Board index » The Bike Bit » Technical Forum

All times are UTC+01:00



Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
gibbsy
 Post subject: Oil pump gear
PostPosted: 16 Oct 2012 20:13 
been reading about the oil pump drive gear failures and I have noticed that most of them seem to be failing on 03 to 05 XBs.
I have also read somewhere on here that after 05 they use an upgraded Buell gear so if this is true would I need to replace the one on my 56 reg Ulyssees.
It's on 32000 miles at present :askmaz:


Top
   
Reply with quote  
smithy
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:27 
Offline
User avatar

Joined: 15 Dec 2011 16:32
Posts: 232
Current ride: xb12s lightning
Location: Nairn scotland
Sure it was 06 but somone will correct me if i'm wrong :coat:
Mines going down to :maz: at the start of November to get the luckyhands one fitted not taking any chances :ill:
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:38 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Gear was updated in 06, lasts longer but still wears. See posts from Gunter.

Why not whip your oil pump off and check what state yours is in?

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:38 
smithy wrote:
Sure it was 06 but somone will correct me if i'm wrong :coat:
Mines going down to :maz: at the start of November to get the luckyhands one fitted not taking any chances :ill:


How much should the job cost?
Top
   
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:39 
pash wrote:
Gear was updated in 06, lasts longer but still wears. See posts from Gunter.

Why not whip your oil pump off and check what state yours is in?


Can you really inspect it properly that way though?
Top
   
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:41 
does anyone know of a Ulysses gear failing?
Top
   
Reply with quote  
pash
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:52 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
The gear will fail when the teeth get thin enough to break off, regardless of which gear you have. I am pretty sure I have read about a later gear failing on BadWeb. Do a search.

Some gears wear quickly, others don't. Is it down to bad batches? How the engines are treated? I dunno...

You may find that your oil pump drive gear lasts longer than your big end or gearbox output shaft bearing. You may find it lasts longer than you want to keep the bike for.

Pop your oil pump and check the state of yours.

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: Oil pump gear
PostPosted: 16 Oct 2012 22:54 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
gibbsy wrote:
smithy wrote:
Sure it was 06 but somone will correct me if i'm wrong :coat:
Mines going down to :maz: at the start of November to get the luckyhands one fitted not taking any chances :ill:


How much should the job cost?

If you have been reading the posts you will know what is needed and how much time to budget.

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 25 Oct 2012 18:47 
pash wrote:
gibbsy wrote:
smithy wrote:
Sure it was 06 but somone will correct me if i'm wrong :coat:
Mines going down to :maz: at the start of November to get the luckyhands one fitted not taking any chances :ill:


How much should the job cost?

If you have been reading the posts you will know what is needed and how much time to budget.


Pash, the parts come to £135 that's the pinion, 2 rocker cover gaskets, 2 exhaust gaskets and the crankcase gasket
Top
   
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 10 Mar 2013 17:16 
Yep well worn


Attachments:
File comment: Oil pump drive gear
image.jpg
image.jpg [ 1.81 MiB | Viewed 543 times ]
Top
   
Reply with quote  
pash
 Post subject: Re: Oil pump gear
PostPosted: 10 Mar 2013 17:19 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Interesting. Is this a Uly?

And did you replace the seal?

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
gibbsy
 Post subject: Re: Oil pump gear
PostPosted: 10 Mar 2013 17:32 
pash wrote:
Interesting. Is this a Uly?

And did you replace the seal?

No I didn't renew the seal! :idea: But there was plenty of lip on it.
Now I bet everyone is gonna give me loads of stick for that so come on bring it on. :oooops:
Then in a thousand miles or so I can tell you all to take it back and prove you all wrong :roll: fingers tightly crossed!
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 

Home » Board index » The Bike Bit » Technical Forum

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited