It is currently 15 Nov 2024 20:18

Unanswered topics | Active topics


Home » Board index » The Bike Bit » Technical Forum

All times are UTC



Post new topic  Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1 2 Next
  Print view Previous topic | Next topic 
Author Message
hawkes3004
 Post subject: Spark plug access xb!
PostPosted: 19 Dec 2012 19:36 
Offline

Joined: 18 Aug 2012 12:57
Posts: 10
Current ride: 05 City x
Location: hampshire
So without looking like a right bonehead...how do I remove the rear sparkplug on an xb9 (without taking a n anglegrinder to either the frame or dropping the engine out) :ffs:

_________________
Just cos ya ain't paranoid don't mean they ain't watchin ya!
Top
  Send private message  
Reply with quote  
hawkes3004
PostPosted: 19 Dec 2012 19:45 
Offline

Joined: 18 Aug 2012 12:57
Posts: 10
Current ride: 05 City x
Location: hampshire
Just checked out the buellxb.com YouTube....ummm front one easy enough, rear one appears to be a fun job..heyho!

_________________
Just cos ya ain't paranoid don't mean they ain't watchin ya!
Top
  Send private message  
Reply with quote  
Dannyboy
 Post subject: Spark plug access xb!
PostPosted: 19 Dec 2012 19:57 
Sure I've seen a step by step in the how to section, maybe worth a look.
Top
   
Reply with quote  
Dannyboy
 Post subject: Spark plug access xb!
PostPosted: 19 Dec 2012 20:01 
Maybe not, unless its in the archives. I'm sure someone who knows where it is will provide a link for you ;)
Top
   
Reply with quote  
Maz
PostPosted: 19 Dec 2012 21:27 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
......or just get the manual from the downloads section at the top of the tech forum :roll:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR
Top
  Send private message  
Reply with quote  
buelling banjo
PostPosted: 20 Dec 2012 12:58 
Offline
User avatar

Joined: 06 May 2009 15:17
Posts: 406
Current ride: T120V - M2 Cyclone
Location: Portsmiff init!!
Maz wrote:
......or just get the manual from the downloads section at the top of the tech forum :roll:


.......or get Maz or Tubbs to do it - better yet do what I did - sold the XB and bought an M2 :yup:

_________________
It's better to have a bottle in front of me than a frontal lobotomy!!
Top
  Send private message  
Reply with quote  
gibbsy
PostPosted: 20 Dec 2012 18:34 
It's on you tube, you loosen it with a socket an extension bar and knuckle joint then you get a piece of hose and push it over the top of the plug and twist it and the plug comes out.
It works very well and doesn't take long
Top
   
Reply with quote  
pash
PostPosted: 20 Dec 2012 18:35 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Can't remember it being that complicated...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Maz
PostPosted: 20 Dec 2012 18:38 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
It's not :?

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR
Top
  Send private message  
Reply with quote  
barney
PostPosted: 21 Dec 2012 09:31 
Offline
User avatar

Joined: 07 Nov 2011 18:10
Posts: 4177
Current ride: Buell ulysses
Location: Telford
hope i'm wrong but I see a helicoil question coming here soon

_________________
Buell Ulysses XB12X 06/08
Top
  Send private message  
Reply with quote  
slimboy
PostPosted: 21 Dec 2012 11:25 
Offline

Joined: 30 Aug 2012 14:37
Posts: 127
Current ride: 04 XB12R
Location: London
Watch this video, Front and rear plugs how to
http://www.youtube.com/watch?v=aMeqOE5Jxsg
Top
  Send private message  
Reply with quote  
kevmean
PostPosted: 21 Dec 2012 13:08 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
I think one of the main things is to make sure you have the correct tool for the job , correct size plug socket in the correct drive size etc makes the job a lot easier than say trying with a 1/2" drive rigid extension bar.

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.
Top
  Send private message  
Reply with quote  
Digger
PostPosted: 21 Dec 2012 13:16 
slimboy wrote:
Watch this video, Front and rear plugs how to
http://www.youtube.com/watch?v=aMeqOE5Jxsg

Irritatingly simple ... but he did, of course, forget to re-connect the rear plug. :roll: Maybe he secretly yearns for a Blast ....
Top
   
Reply with quote  
Mickrick
PostPosted: 21 Dec 2012 16:57 
Offline

Joined: 16 Nov 2011 20:57
Posts: 1028
Current ride: Pushbike!
Location: Spain
The hat is Gay.
Top
  Send private message  
Reply with quote  
Digger
PostPosted: 21 Dec 2012 17:00 
Excessively so, I thought :?
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1 2 Next

Home » Board index » The Bike Bit » Technical Forum

All times are UTC

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited