ok chaps here go's not started my 06 uly since oct battery been on oximiser,turned the key got all the normal whiers and buzzes as things cycle hit start one big grunt and nothing red lights went out now just got high beam light and no action
help
jon

Get a voltmeter across the battery and look what its reading when you press the starter. Sounds like you've got a cell down. Had this on the xb12s. Battery would fire the bike when freshly charged but leave it a week it would give exactly the same symptons as yours. If its the origional battery you've not done bad. Mine was goosed after four years. Hope this helps

battery new in july only done about 100 miles since then
jon
will check tomo
uly only done 3600 miles from new
no power on the start button all i got on the dash is the full beam no power to anything else

Relay?

_________________
08 Specialized Langster

Oxide build up on battery terminals? May not be readily apparent!
But then if the main beam works?
Bad connection elsewhere or relay as Pash says?

_________________
aka DrBagiva, DrBusqvarna, Uncle Knobhead