I was just delugging my old race can, with a view to sometime getting it blasted and cam coated. Most of it is ok, but the underside of where the rear straps were is very rusty, and has actually rusted through in one spot. Is the can worth saving, or should I just bin it

_________________
Wear the fox hat

Turn it into a small barbecue with the aid of a grinder

You could plug both outlets and keep it under your bed for when your bladders full in the night

You could make a Bong for you and Mrs Bonzo

_________________
If your dreams don't scare you, they are not big enough.

Ever heard of a welding machine?

_________________
The sound of a V-twin engine braking is music to my ears!!

"Bongzo..."

If you weld the hole up (and you need to plate it), the strap will no longer fit.

Best make a bong with it...

_________________
08 Specialized Langster

looks like the piece of crap off of my firebolt which will be binned and replaced with an albert.......when ive recvered from the m2 rebuild cost

made a 40mm wide wrapering patch for mine outa 1mm .....sorted .........all previous ideas worth looking at toooooooo PS your std straps should still fit mine did

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER

Thanks for the helpful posts, both of them Sounds like the welding idea may work then

_________________
Wear the fox hat

Cut the rot out and joggle the edges, so the plate will fit flush.

Exactly what I've done, but I'm thinking long term here

_________________
Wear the fox hat

If I ever get back to the UK can I bring it round your gaff and get some help Loughborough's snot far from Newark

_________________
Wear the fox hat