It is currently 10 Dec 2024 00:42

All times are UTC




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: 08 May 2013 16:12 
Offline
User avatar

Joined: 04 Apr 2011 23:52
Posts: 274
Current ride: '03 XB9S Lightning
Location: Dundee, Scotland
Hello all, I'm back after sometime away from the forum due to near head bursting O.U. assignments over the winter. I'm looking for info regarding stainless brake disc bolts (front and rear) for my 1998 S1, I've searched the forum but can't find any relevant threads. I've contacted Black Bear, they were helpful with the other parts I've been after but they only have the standard zinc plated bolts. So, where will I be able to source stainless ones ? also if anyone has info about the exact size of these bolts I may be able to order them from Pro Bolt.


Top
PostPosted: 08 May 2013 16:16 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8643
Location: Manchester
NEVER, EVER use stainless fasteners for brake discs, calipers or any other stressed components :roll:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 08 May 2013 16:44 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
:yt: It's virtually a banned material on home built aircraft. PFA Inspectors hate the stuff.

Good luck if you want Ti stuff from Pro Bolt, last time I enquired, they only did metric. IIRC S1 disc bolts are UNC.

_________________
If your dreams don't scare you, they are not big enough.


Top
PostPosted: 08 May 2013 18:47 
Offline
User avatar

Joined: 04 Apr 2011 23:52
Posts: 274
Current ride: '03 XB9S Lightning
Location: Dundee, Scotland
Maz wrote:
NEVER, EVER use stainless fasteners for brake discs, calipers or any other stressed components :roll:


Ok, well that's pretty definite, I'll bow to your superior knowledge. :worthy: I know Black Bear can supply the original bolts, I'll call them tomorrow.


Top
PostPosted: 08 May 2013 19:03 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Here's one for you...

viewtopic.php?p=154193#p154193

And Mr Tall was right...

http://www.pro-bolt.com/stainless-steel ... YqV1kqPex0

But I still think it's wrong...

_________________
08 Specialized Langster


Top
PostPosted: 08 May 2013 20:53 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3152
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
I believe you can get chrome plated disc bolts from a HD dealer, seen them in DG20 in the past, sold as a set on a card, possibly Screaming Eagle...?

_________________
'98 M2 Razorback, it's a keeper.


Top
PostPosted: 08 May 2013 21:00 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8643
Location: Manchester
:shock:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 08 May 2013 22:19 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
rik wrote:
I believe you can get chrome plated disc bolts from a HD dealer, seen them in DG20 in the past, sold as a set on a card, possibly Screaming Eagle...?



Should send a set to Wandell, for his Golf cart lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited