Hi all
I am saving up for a Holtworks tank so am having a bit of a clearout.
These Maxtonised S1 forks have been on the Grenade for the last 5000 miles. I have no complaints, but time to move on...

Good points:
They are anodised black
They have been serviced in the last 1000 miles
They perform well
Bad points:
They are marked where the speedo cable has rubbed. Most of this was done by Beef. I stuck a bit of stick backed protector on (which I pulled off when I serviced them), you can do the same, but one would never notice the marks as they are on the inside (when the forks are positioned correctly)

The anodising is good, but the initial surface finish wasn't, i.e. if you look really close, you can see the combined finish is not perfect

I got them from our very own Beef in around 2009, I crossed his palm with about £400 and for that he delivered them to my green wheelie bin.
Yours for £150 plus postage.
10% of the sale goes to UKBEG cos it's wurf it...