I've got a few bits listed on the bay.
151256002325, a brand new dash/display/clock.
151255996988 a 2008 alternator set up.

And the old TM Torque spammer
I've got a std box if anyone wants one for modifying.

Having bought 3 complete 1125s,- only one of which was damaged- and a couple of engines I've got loads of spares.

If there's anything in particular you need give me a shout I should be able to help.
I also have moulds for fairings, airbox covers and front guard if you ever fancy a colour change. There's a few pics of my race bikes floating around.

I have fairings with no headlamp cutouts if you wanted a new face for your 1125.

As I get a bit more mobile I'll get the single seat unit mould done as well as getting to work on the belly pan that I promised ages ago.

_________________
Nige...1125d 9.43@140mph

Hi, I'm after a few bits for a project, namely forks, spindle, mudguard and a set of yokes.

You got any of those?

Cheers

1 left fork leg, right leg bent- needs new stanchion, ali slider fine. wheel spindle and a top yoke. Think I've got bottom yoke but stem was bent.

yes to mudguard or can do you a fibreglass one.

_________________
Nige...1125d 9.43@140mph

Thanks for the quick reply.
Stem probably wont be needed so no worries there as long as the yoke is straight.
Fibreglass muddy sounds good.

How much are you looking for?

Dan

I don't Know ???

We're running round like idiots getting ready for the first race weekend, I'll have a look at some 2nd hand prices when I get 5min and I'll look for the bits on monday for you... I'm starting to have trouble remembering where I put things...I blame the painkillers

The bent leg actually came off a rideable bike - my 2008- but the fork seal kept leaking, I picked up another leg from pinwall with a load of other bits - it was cheaper than a set of seals and quicker to do. When I pulled the leg out it was obvious it wasn't quite right.

Let me get back to you on monday

_________________
Nige...1125d 9.43@140mph

Here you go! everything bar the mudguard, I can knock up one of those whenever







The right leg has a kink, but as I said it came off a good ridable 1125, had been down the track for 2 seasons, before I got fed up cleaning fork oil.

Left leg and yokes off a 4k miles 08 build 59 plate.

Open to sensible offers

_________________
Nige...1125d 9.43@140mph

Ooo that's a pretty sight!

So that's all straight/usable but the one fork could do with a new stanchion to stop it leaking?

I'll leave the muddy out for now as I've no idea what you normally charge but I will have one. (If you do custom fibreglass seat units I may have a job for you too)

So, offer for what's pictured, ideally I'd like to pay somewhere in the region of £200-250 considering stanchions are £120 plus seals etc.
How far out am I?

You have PM

_________________
Nige...1125d 9.43@140mph