Can anyone tell me the AF measurement of the hex on this sensor? I want to cut a slot in a socket so I replace it. Ta

_________________
If your dreams don't scare you, they are not big enough.

If you mean the temp. sensor, it's 1/2''

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

I'll go and chop my best Snap On socket then

_________________
If your dreams don't scare you, they are not big enough.

I did .......also got a 3/8 drive, deep crows foot flarenut socket for when they're really tight

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Nah........couldn't bring myself to do that, so I went to Halfords. None on display but he had a look around the back and found a Pro 13mm, and as it was a 'spare' he let me have it for £1.99

My sensor (and the doner bike one) were a little more than finger tight. The O2 sensor was a different story though

_________________
If your dreams don't scare you, they are not big enough.