Please help!

So I have just got my buell out of the garage after being parked up for a while.
I have done a oild and filter change and replace the transmission oil and also fitted a new battery.
I have check the bike all over for leaks and see if everything is working properly and egerything seem ok,
apart from the check engine light does not go out once the bike is runnig and remains on.

Any ideas pleaes !!!

thank you.

Have a lol in the How To section and read the fault codes...

_________________
08 Specialized Langster

Thank you for your help will try and find fault manually.

Ecmspy looks good is it worth a download ? If so where can I download it from and what do
Need to get up and running e, g lead and software version ?
Is it easy to use for sone1 who is not use to fidiling with ecu.

thanks for the help.

Whereabouts in the UK ?

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Telford shropshire.

So I have manaully checked the fault code read out it is repeating code 57 over and over, whar does this mean.
also the read light is coming on and going off now but atvdifferent intervals and then sometimes it stays on, really confyse now. Also the bike seems to be struggling to rdv up from tick over and will cut off if I rev to quick and then is a real pain to re start, after cuts out I have to rev throttle to about half way for it to re star. Any ideas whar is happening please.

Where can I down load ecm spy and get cable from thank you.

_________________
08 Specialized Langster

So I have ran ecm spy on bike and it has shown that the ETS fault 14,
I have removed sensor from the rear cyclinda and wondering if there was a way
of testing the sensor before I buy a new one ??

cheers.