Does anyone know if replacement of the neutral switch is a job that requires any special tools ,as in removal of the front pulley?(xb12scg 09)

_________________
Time flies like an arrow,fruit flies like a banana.

As far as I know front pulley removal required. Large Socket, Impact Wrench and remember it's a LH thread. I used a box wrench to remove and fit the switch, otherwise I believe a thin wall deep socket is required.

Cheers for your help, will give it a go, any idea on a price for the switch?

_________________
Time flies like an arrow,fruit flies like a banana.

Deffo NOT a DIY job IMO.......unless you have all the right tools, including a LH torque wrench......tightening proceedure is critical.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Ok point taken, think will hand it over to my local bike shop

_________________
Time flies like an arrow,fruit flies like a banana.

there are bike shops and there are bike shops
just hope they know what there doing

_________________
Buell Ulysses XB12X 06/08

This guy is a mate of mine who knows his stuff he's worked for dealerships for many years now works for himself, he is one of those guys who never stops learning.

_________________
Time flies like an arrow,fruit flies like a banana.

Manual for 08 XBs should help, look in the Manuals section above...

_________________
08 Specialized Langster

Cheers pash! Got me the drawing yet?

_________________
Time flies like an arrow,fruit flies like a banana.

Did mine myself on the xb12 s was an easy job took about half hour got a new one from harley