It is currently 23 Nov 2024 10:09

All times are UTC




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Bar End Mirror mod
PostPosted: 18 Jan 2015 13:54 
Offline

Joined: 08 Jan 2015 09:12
Posts: 7
Current ride: 2008 XB12R382
Location: Australia
Recently bought some bar end mirrors from Hong Kong. They are a decent enough quality, except for the internal expanding hardware which is flimsy and not up to the job.
The attached photos show my cheap fix. The Loxin anchor takes the M6 bolt which came with the mirrors, the two different sized PVC tubes (10mm and 13mm) form a sleeve over the Loxin. A bit of dishwashing detergent was used to lubricate as it is a tight fit inside the handlebar. The cost is in Australian dollars, probably about 3 to 4 quid in the UK.


Attachments:
IMG_0568.jpg
IMG_0568.jpg [ 101.63 KiB | Viewed 6763 times ]
IMG_0571.jpg
IMG_0571.jpg [ 152.43 KiB | Viewed 6763 times ]
IMG_0577.jpg
IMG_0577.jpg [ 93.3 KiB | Viewed 6763 times ]
Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 14:46 
Offline
User avatar

Joined: 23 Jun 2009 12:55
Posts: 658
Current ride: S1W,Hype,HP2,R1200RS
Location: Preston, Lancs
I had to do a similar 'mod' when the star fangled nut (any cyclists will understand) failed inside my early firebolt swingarm pivot shaft.....later ones had a proper thread machined inside.


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 16:12 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
:yt: I always use Rawlbolts for bar end mirrors :yup:

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Bar End Mirror mod
PostPosted: 18 Jan 2015 16:47 
Offline
User avatar

Joined: 27 Sep 2010 21:50
Posts: 1312
Current ride: Can-Am V-twin
Location: Biggar, Scotland
jeznewsome wrote:
I had to do a similar 'mod' when the star fangled nut (any cyclists will understand) failed inside my early firebolt swingarm pivot shaft.....later ones had a proper thread machined inside.


Never liked star fangled nuts and that was one of the main features of my choice of Cannondale bikes...sealed cartridge bearings for steering and 88 needle bearings for the smoothest suspension :-)

_________________
Insomniacs of the world unite, you've nothing to lose but your sleep!


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 17:18 
Offline
User avatar

Joined: 23 Jun 2009 12:55
Posts: 658
Current ride: S1W,Hype,HP2,R1200RS
Location: Preston, Lancs
Fat Crip wrote:
Never liked star fangled nuts and that was one of the main features of my choice of Cannondale bikes...sealed cartridge bearings for steering and 88 needle bearings for the smoothest suspension :-)


Hmmm not sure I agree about the needle rollers.........My Lefty took no end of expensive servicing to keep it right (looked cool however), the Fatty coped much better with the roller bearing plates nicely tucked away near/inside the headstock though.


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 17:40 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
What's a 'Star fangled nut'? :?

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 18:11 
Offline
User avatar

Joined: 23 Jun 2009 12:55
Posts: 658
Current ride: S1W,Hype,HP2,R1200RS
Location: Preston, Lancs
Image

Fits fits inside a bicycle fork steerer to allow a threadless headset to be preloaded......you did ask!


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 18:49 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
Ah, OK - still none the wiser as to what it does, but now I know what it looks like :yup: lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 20:49 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10973
Current ride: X1 2001
Location: southampton
Adam wrote:
What's a 'Star fangled nut'? :?


what happens when you slip off the pedals & goolie your self on the crossbar :coat:

_________________
Feros Ferio


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 21:04 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
:run:

_________________
08 Specialized Langster


Top
 Post subject: Re: Bar End Mirror mod
PostPosted: 18 Jan 2015 21:16 
Offline
User avatar

Joined: 23 Jun 2009 12:55
Posts: 658
Current ride: S1W,Hype,HP2,R1200RS
Location: Preston, Lancs
:yt:


Top
 Post subject: Bar End Mirror mod
PostPosted: 19 Jan 2015 15:53 
Offline
User avatar

Joined: 27 Sep 2010 21:50
Posts: 1312
Current ride: Can-Am V-twin
Location: Biggar, Scotland
jeznewsome wrote:
Fat Crip wrote:
Never liked star fangled nuts and that was one of the main features of my choice of Cannondale bikes...sealed cartridge bearings for steering and 88 needle bearings for the smoothest suspension :-)


Hmmm not sure I agree about the needle rollers.........My Lefty took no end of expensive servicing to keep it right (looked cool however), the Fatty coped much better with the roller bearing plates nicely tucked away near/inside the headstock though.


I had and still have a Fatty, obviously! Still in pretty well perfect nick almost 11 years after I last rode her and 18 years since I bought her. Beautiful bike, though only the frame and forks are original now.

_________________
Insomniacs of the world unite, you've nothing to lose but your sleep!


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited