It is currently 12 Dec 2024 14:12

All times are UTC




Post new topic  Reply to topic  [ 50 posts ]  Go to page Previous 1 2 3 4 Next
Author Message
 Post subject: In ebaying some X1 parts
PostPosted: 14 Mar 2015 23:18 
Offline
User avatar

Joined: 01 Apr 2014 16:47
Posts: 148
Current ride: 99 X1 Lightning
Location: London
True about the BMW. Even their 7 series car had a safety recall a couple of years ago. Difference being though that BMW are BMW. All problems fixed, no questions.
Ducatis are Ducatis.

My point though Is that owning the X1 is more like keeping a vintage bike. Needs looking after and fettling.


Top
PostPosted: 14 Mar 2015 23:35 
Offline
User avatar

Joined: 07 May 2009 12:06
Posts: 487
Current ride: 2001 M2
RiflemanTom wrote:
If you'd have read the listing though you'd Have noticed that Ive actually included a warning in it. There's one on the oil pump drive listing and engine mount listing too.


....but that's 'cos you've since amended the descriptions......and there was no warning on the primary chain tensioner....just a misleading description stating it was from a 2001.

Not everyone is as clued up as many on here and I couldn't have it on my conscience, selling one of those, and like others would have just tossed it.....in fact I gave away a brand new updated tensioner to someone on here when they needed one....


Top
 Post subject: In ebaying some X1 parts
PostPosted: 14 Mar 2015 23:36 
Offline
User avatar

Joined: 01 Apr 2014 16:47
Posts: 148
Current ride: 99 X1 Lightning
Location: London
Bored with this now. If I wasn't on duty I'd be in the pub. What's on Atlantic I wonder?


Top
PostPosted: 14 Mar 2015 23:50 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
........and some machines aren't correctly assembled in the factory :roll: Husqvarna Nudas had two spacers on the swinging arm missing and Husky/KTM won't issue a recall because 'it doesn't affect the handling' (but would fail an MOT :roll: )
There are aftermarket kits to cure this, but they don't centre the wheel correctly. My lathe has been busy sorting my bike, and a few others - in fact, I've now run out of my stock of self lube nylon bar lOl

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: In ebaying some X1 parts
PostPosted: 14 Mar 2015 23:54 
Offline
User avatar

Joined: 01 Apr 2014 16:47
Posts: 148
Current ride: 99 X1 Lightning
Location: London
Ive got a brand new Jag. I'd had it for about 6 months when the engine went pop and I had to do the rest of the M25 in limp home mode. Machines are like people I suppose. Sometimes bits go wrong


Top
PostPosted: 15 Mar 2015 00:15 
Offline
User avatar

Joined: 07 May 2009 12:06
Posts: 487
Current ride: 2001 M2
RiflemanTom wrote:
What's on Atlantic I wonder?


Game of Thrones- Greatest moments....whatever that is..... :D


Top
 Post subject: In ebaying some X1 parts
PostPosted: 15 Mar 2015 00:21 
Offline
User avatar

Joined: 01 Apr 2014 16:47
Posts: 148
Current ride: 99 X1 Lightning
Location: London
Gpod programme about coke smuggling on Sky 526


Top
PostPosted: 15 Mar 2015 12:06 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
RiflemanTom wrote:
True about the BMW. Even their 7 series car had a safety recall a couple of years ago. Difference being though that BMW are BMW. All problems fixed, no questions.
Ducatis are Ducatis.

My point though Is that owning the X1 is more like keeping a vintage bike. Needs looking after and fettling.


I think you'll find that Buell were far faster at sorting recalls than BMW have ever been , BMW sell on the mistaken belief that you are buying German engineering quality when in effect you are buying Chinese quality at German prices. My 2008 GSA looks like it's part of yet another BMW recall due to substandard rear wheel flanges , you might say good on BMW for recalling a bike that old but it's only when you look into how long ago the first reports were of this problem that you realise that they only recall when they are forced into it. Some on the BMW forum have had to pay out of their own pockets having this item replaced over the years and some unlucky ones more than once.
2001 X1's never had any recalls and that is why Maz always says it's the best Buell to buy. Mine has done over 60000 miles and I expect lots more as well , not saying it's never had problems but it's taken me all over Europe.

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.


Top
PostPosted: 15 Mar 2015 14:12 
Offline

Joined: 20 Jul 2012 23:20
Posts: 1080
Current ride: 2001 X1//TRK 502x
Location: surrey
tom I got my 2001 X1 when it was three months old. Didn't know much about them just always liked them,had many years trouble free. I only joined the forum in 2012 ' a couple of years ago I had some trouble which in the end was a minor sensor issue. However I took it to a " V twin specialist" about eight months and five visits later the bike was just as bad and I was out of pocket to the tune of 1600 quid. A visit to Maz had sorted it in a week and rectified not only the original problem but also undone the bodges the specialist had inflicted. My point being that there are buell[/list] owners who don't or never will do the forum thing. They may well buy your items, just because their not aware doesn't make it OK to sell them.


Top
PostPosted: 15 Mar 2015 19:19 
Offline

Joined: 01 Nov 2012 21:42
Posts: 297
Current ride: Cyclone m2 1998
Location: Bedfordshire
My primary chain tensioner broke on my 98M2, fortunately it did no damage and I was given an updated one for the price of postage, I have removed and replaced some of the parts you are selling but they are not going on eBay

_________________
Ride it like you've stolen it


Top
 Post subject: In ebaying some X1 parts
PostPosted: 15 Mar 2015 21:27 
Offline
User avatar

Joined: 01 Apr 2014 16:47
Posts: 148
Current ride: 99 X1 Lightning
Location: London
Well you'll be happy to know that I removed them from eBay yesterday so you can rest safely knowing there's not a rogue tensioner loose in the world any more. :-)

Fair one guys. I assumed that most people would be aware of the shortcoming of these parts but I suppose you can't assume that everyone would have done a bit of homework. Anyway they're in the bin now and heading to a landfill site.


Top
PostPosted: 15 Mar 2015 22:20 
Online
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8643
Location: Manchester
8-)

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
PostPosted: 15 Mar 2015 22:26 
Offline
User avatar

Joined: 20 Oct 2009 07:13
Posts: 1056
Current ride: 2001 X1, EBR 1190SX
Location: West Lothian
:yup: good man.

_________________
Go big!! Or go Home!!


Top
PostPosted: 16 Mar 2015 00:42 
Offline
User avatar

Joined: 07 May 2009 12:06
Posts: 487
Current ride: 2001 M2
:yt:


Top
PostPosted: 16 Mar 2015 11:22 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3153
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
RiflemanTom wrote:
Well you'll be happy to know that I removed them from eBay yesterday so you can rest safely knowing there's not a rogue tensioner loose in the world any more. :-)

Fair one guys. I assumed that most people would be aware of the shortcoming of these parts but I suppose you can't assume that everyone would have done a bit of homework. Anyway they're in the bin now and heading to a landfill site.

:clap:

_________________
'98 M2 Razorback, it's a keeper.


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 50 posts ]  Go to page Previous 1 2 3 4 Next

All times are UTC


Who is online

Users browsing this forum: DotNet [Bot] and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited