It is currently 10 Dec 2024 12:22

All times are UTC




Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Tuning an '08 XB9
PostPosted: 10 Apr 2015 12:06 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
I know this sort of question that keeps coming up but I've not found any threads concerning an '08.

At the moment I am running stock headers (the smaller ones) a modified stock silencer (twin exit & valve open), K&N & Kitech fueller, it all goes fine with no problems and I'm very pleased with the improvements this made but appreciate this maybe isn't the best long term route.

I have a set of the earlier headers and a factory race silencer I'd like to fit but would also prefer to do things properly with the ECM and remove the fueller, so my question is, does ECMSpy work with the DDFI-3 ECM (if this is what I have) and does anyone have any experience of going this way?

Maybe a silly question but would an earlier race ECM work?

I'm more than happy being a spanner monkey but have zero experience playing around with injection systems & fuel maps so don't want to balls it up.

Fanx


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 12:32 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
ECMSpy for Mono works with all ECMs

02-07 Race ECM will not work with 08/09/10 bikes

_________________
08 Specialized Langster


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 13:53 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
Cheers Pash. Looks like I'll be after one of your leads when you next do a batch then :yup:

Now another silly question, I thought the earlier headers were all larger but it turns out this can't be the case as my set have literally just arrived (my earlier post was pre-emptive of the postman) and they are actually 2-3mm smaller on the OD.

What year should I have looking for? These were described as 2003 onward :sad1:


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 15:16 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
I shouldn't worry about what the old headers look like, they are half the story cos the muffler has a restrictive catalyst on the later models. The U.S. (non-catalyst) headers are the same from 02...

_________________
08 Specialized Langster


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 17:43 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
I thought I'd read somewhere (and seen) that some were a a larger diameter, and that the '08 headers diameter was reduced to increase gas speed through the cat and that effectively strangled the engine.

But, if I understand you correctly, the diameter is less of an issue than losing the cat in which case I'm tempted to keep the originals and either de-cat my current silencer or go back to plan A which was to save my pennies for a Remus with the larger inlet. If the headers themselves offer no real advantage other than choice of silencer I'll rather save myself the fiddly job of swapping them.

I've got no grumbles with it whatever, it brings a smile every time out but I can't resist tinkering and the other projects are done for now :)


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 19:16 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
I would put the earlier pipes on. I understand (from Tubbs) that larger diameter headers on a 9 give you a drop in power. I am no expert on 9s, but easier to start with something that works well...

_________________
08 Specialized Langster


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 20:06 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
OK, I was starting to think I'd made a pigs ear of collecting the parts but it sounds like I made a lucky mistake with the headers in not getting the bigger ones then so that's good news.

I also have a Jardine can which I got before the race one came up, the Jardine looks like a pretty generic silencer so whilst popular I guess the factory one would be the best option - certainly my preference for looks and jacking points for wheel removal.

Thanks for your help, turns out I didn't know half what I thought so its much appreciated. :worthy:


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 10 Apr 2015 20:18 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
The Jardine is crap (sorry). The Buell Race exhaust, although a bucket of rust, won (IIRC) the exhaust shoot out at American Sportbike back in the day...

_________________
08 Specialized Langster


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 11 Apr 2015 21:44 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
That's that decided then. The race can I have seems pretty solid but I'm going to have a look inside with an endoscope to see what its really like, can't be any worse than the standard one :D


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 13 Apr 2015 07:33 
Offline

Joined: 24 Mar 2015 13:40
Posts: 39
Current ride: Buell xb9sx
Location: East Sussex
Just spent 7-10days getting a race map onto a 2007 xb9sx. And it runs like a dog between 4000-5000rpm I'm refitting the fueler today and putting stock map back, personal I would have a look at twin motorcycles they will reflash it over a computer link.


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 13 Apr 2015 14:02 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
Already spoken to them, they said they could get close but suggested I look on some american forums for the right map. Makes sense I suppose as I assume the race can would have been more available over there.

Its worth knowing about your problem though as it goes like the proverbial brown stuff off a spade at the moment and it'd be a shame to spoil it with what is supposed to be a better setup. I was always going to keep the fueller on the shelf with the other bits anyway but elsewhere on here they generally get a bit of a slating so thought I ought to try & do it properly.

Possibly a silly question but can you not adjust the map you have with ECMSpy to sort out the problem?


On a different note, I was down your way again yesterday, maybe see you at Wessons cafe sometime when you're up & running :yup:


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 13 Apr 2015 20:43 
Offline
User avatar

Joined: 07 Nov 2011 18:10
Posts: 4190
Current ride: Buell ulysses
Location: Telford
pash wrote:
The Jardine is crap (sorry). The Buell Race exhaust, although a bucket of rust, won (IIRC) the exhaust shoot out at American Sportbike back in the day...

exhaust shoot out pdf link
http://www.sterlingidea.com/images/buel ... t_RevB.pdf

_________________
Buell Ulysses XB12X 06/08


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 14 Apr 2015 07:15 
Offline

Joined: 24 Mar 2015 13:40
Posts: 39
Current ride: Buell xb9sx
Location: East Sussex
A map is the best answer because it does fuel and timing I just don't have the time to play around with it. I have spoken to a couple of people about putting it on a rolling road but the don't have experience with buells so I would not trust them. Pm me if you are ever out this way for a ride out!


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 14 Apr 2015 11:16 
Offline
User avatar

Joined: 05 Jan 2011 16:11
Posts: 42
Current ride: Lightning XB9SX
Location: Kent
Thanks for that link Barney, makes for some interesting reading and obviously took a lot of time and effort to compile such a detailed comparison. :clap:

It'd be worth you looking at that too Goofy, the race pipe does have a dip right where you're having problems. There was a race ecm up for grabs on the facebook page last week, no good for me but might sort you out if he still has it.
I'll try and let you know if I'm going out your way, just depends on work & kids when I can get a bit of time out so can be a bit last minute.


Top
 Post subject: Re: Tuning an '08 XB9
PostPosted: 09 Jun 2015 15:42 
Offline

Joined: 09 May 2015 17:59
Posts: 10
Current ride: 2008 XB12R
Location: United States
pash wrote:
ECMSpy for Mono works with all ECMs

What about B2BIC?


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited