It is currently 16 Nov 2024 11:09

All times are UTC




Post new topic  Reply to topic  [ 21 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:04 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
Fine on the way out , on return journey bike started to run rough, wont idle { nothing new} running on one cylinder until you get to 3k then picks up like nothings wrong. Took it out on the motorway 70 + for 10 miles, pull over for an hour , start it up and idles rough then stalls. Start it up...one cylinder again for 1.5 miles on A road full throttle in 2nd 40 mph max, throttle off then 2nd pot picks up?
Pulled out rear plug , oh wot fun, plug looks like its running lean fan is on nearly all the time.
Any ideas ?


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:11 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Trade it for a tuber :idea:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:18 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
And in the meantime? :sad1:


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:24 
Offline
Moderator
User avatar

Joined: 15 Apr 2009 17:25
Posts: 11772
Location: Oswestry
Blink, pulling a plug and looking at it will tell you very little about the mixture. To do a 'plug chop' requires a very specific procedure and modern fuels don't give clues like the old leaded stuff did. Even if you take a trip to your nearest airfield and fill with leaded petrol, modern FI and Cats really don't like the stuff.
You'll need to spend time on a Dyno to sort fuelling.

_________________
If your dreams don't scare you, they are not big enough.


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:28 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
HT lead worn through? Do a search. Common issue...

Rear cylinder should never run lean as the lambda sensor controls closed loop from there. Any fault codes stored (check the how to section)?

_________________
08 Specialized Langster


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 18:32 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
Thanks Adam,
i must be getting old :dance: , teknolagy is a :tosser: .
Maybe i should just get the bus :ill:

Pash lead looked OK, lots of oil from airbox so took HT lead out so i could mop up ,


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 20:31 
Offline

Joined: 28 Sep 2009 20:58
Posts: 8
Location: Newcastle Upon Tyne
Lots of oil in airbox??

Check your oil level.


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 11 Oct 2009 22:37 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Please explain how an excessive oil level in a dry sumped engine would result in the breathers dumping into the airbox ? :twisted:

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 12 Oct 2009 20:26 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
No no no .......lets work out why my piece of shit Uly is fucking rubbish, sorry i mean firing on one cylinder.


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 12 Oct 2009 21:38 
Offline
Site Admin
User avatar

Joined: 15 Apr 2009 17:17
Posts: 8642
Location: Manchester
Could be one of many known issues which are all easy enough to diagnose if you know what ya doing and have the right equipment.

I'll kick off with a faulty ign. coil ?

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 12 Oct 2009 21:43 
What year bike Bink and how many miles done. Any mods on it.


Top
   
 Post subject: Re: Uly on 1 cylinder
PostPosted: 13 Oct 2009 09:43 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
06 bike 4700 miles no mods,


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 13 Oct 2009 14:39 
Offline
User avatar

Joined: 08 May 2009 09:37
Posts: 32
Location: Glasgow
Checked the earth lead under the seat ? :oooops:

_________________
'08 Street Triple R
'07 XB12 STT (now gone)
'03 Vauxhall VX220
"is it meant to do that ?"


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 13 Oct 2009 19:20 
Offline
User avatar

Joined: 18 May 2009 21:01
Posts: 10
Location: Chessington
LazyDonkey wrote:
Checked the earth lead under the seat ? :oooops:


Done that today, no difference. Ordered some plugs and leads will try these first then replace the coil if no result. Shit loads of oil in the airbox again...only cleaned it out 40 miles ago?


Top
 Post subject: Re: Uly on 1 cylinder
PostPosted: 13 Oct 2009 23:05 
If you have lots of oil in the airbox then it is going to go into the engine with the burn cycle and could foul the plugs. You should have none of note.

It sounds like you will need to seek advice from someone like Maz on this issue.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 21 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited