can anyone advise me of where to get an oil filter wrench to fit a uly, my local hd dealer have had one on back order for 3 months, fed up waiting, been told its 65mm?
any advice appreciated

I have a faint memory, that pash once made a list of suitable devices. Maybe that's still present in the archive or take a look a the how-to section.

_________________
"It is often said that before you die your life passes before your eyes. It is in fact true. It's called living."
Terry Pratchett

Don't forget to check the How To section

viewtopic.php?f=17&t=15

I have one of these:

http://cgi.ebay.co.uk/HONDA-65MM-OIL-FI ... 5883673bbc

and it works a treat

_________________
08 Specialized Langster

It should, although tight, come off by hand. If not you could, I know not a top line thing to do, use a screwdriver.

K&N filters have a hex head on top so you can use a spanner or socket.

Dont forget to fill the filter and oil the seal.

And, when you put the new one on, tighten it by hand...

_________________
08 Specialized Langster

Grip firmly at the base, think of England and twist.

Oh and then you can fit your new oil filter

i use the socket that i used on my suzuki.

I just used a strap type, don't have to worry about the size then

_________________
Wear the fox hat

Strap wrench works fine for me, on a extension bar.

_________________
S1 Old Skool Bool

DG 21

thanks for all your advice, much appreciated.

_________________
08 Specialized Langster

I got my socket type wrenches - Tuber and Fueller, from Halfords.
If the filter is on stupid tight, then drill a hole through the filter wrench and then stick a rod (6" nail etc) through the whole lot.

_________________
If your dreams don't scare you, they are not big enough.