Nope i'm not getting all excited about it and not sure if this subject has been covered on here but whilst looking around the 1125 in the warmth of my utility room today noticed that the horn wires are pulled across the aluminium mounting bracket like a drum skin. These are obviously a short waiting to happen so suggest other 1125 owners take a look at theirs............not sure if this is normal or if i just got short wires

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

There's loadsa stuff like that Kev......main lead to the starter- chaffs between the head and K bracket, LH engine harness under the scoop- chaffs against the breather fitting......etc.

There is enough length on the horn wires to pull some slack out of the trunking.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

Stiff horn eh??? I've heard that can be a problem......

_________________
Valencia Orange XB12Scg - serviced by Maz 2018
Black P3 Blast - serviced by Maz and fixed by Maz in 2019

Not much slack in the throttle cables either... On the R this is...

_________________
08 Specialized Langster