i reckon about £320 for the first few off.
i have one spare now but i think wkd1 wants it as well as the reverso.
i can possibly get two made quite soon
the ones i'll make for sale will be as the best dyno one we had, i only modded the existing headers for my own interest
i can lengthen the primaries on my one but most of the other aftermarket stuff, (buell race exhaust excluded) they all have shorter primaries, so we can only do more back to back tests

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

Thats a lot of exhaust for £320
Well done Al top job

Whats the latest on the reverso big Al? Any new pics?

Al

Is there a slip on version of the single exhaust using original headers ?

yeah the slip on that we dyno'ed is what i'm planning on doing, i can modify standard headers to my new spec but i have to warn you its an absolute bastard getting the rear header off for what might not be much gain
no more pics of the reverso yet, only whats on here, i will get some of it off the bike

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

yes i'm having two, one reverso and the first 'normal' one

The reverso is going on the fully faired R and the other on the CR......... cant wait to get out of bloody China and get 'em on the bikes.....

As far as i can see these are without doubt the best value for money pipes out there, and i hope that all the 1125 owners on here, buy one from you albert666 and spread the word about this great bike.

on a separate note... got an email today from EBR saying that the 1190rr sub frame, tail, tank etc will be available in the next few weeks so that’s also planned for the R, will look at relocating the new super small battery down low, possibly in the rear space left void by the standard can if not on the side al la Ducati... behind the pod (now less fans) opinions? Maz etc?

Wkd1

_________________
the most important things in life, aren't things

Looking excellent... and a credit to all involved....

Will make an excellent bike, even better.... Albert PM sent re reverso

Al

Where do I send the cheque?

Dan

_________________
Dan

Growing old is inevitable - growing up is a matter of choice

i will be resuming exhaust building very soon as soon as the new shed is done, almost there now

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

well i'm back and got the two pipes, i can say the pictures dont do them justice, the quality of the work is fantastic, the reverso is fitted and sounds great, i will need to mod the lowers a little to fit, but it will be well worth the effort to do it.

will try to get on with it over the next couple of weeks, and post some pics when done.

thanks again Alan for the work....

on a seperate note, lent my farther in law the CR and he now wants one

Wkd1

_________________
the most important things in life, aren't things

doesnt the twirly bit get too hot for the right hand pod?

_________________
of course its black

Excellent. I seem to remember you saying you had access to a Db meter. Any chance of you putting it 18" away from the outlet at an angle of 40 deg and seeing what the reading is at 5k rpm?

Muchos grassyarse

_________________
If your dreams don't scare you, they are not big enough.

45deg and 1metre away it was 110db @5000rpm
gets down to 108db with a baffle
working on a round silencer to try and get a bit more silencing volume to it.
if that don't work i have another plan
got a few more variations to try at tubbs dyno when i get them done too.
i am slowly getting on with all the builds.
the primary probably looks closer in the pic than it is, that another mod anyway

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

_________________
If your dreams don't scare you, they are not big enough.

Let me know how you get on mate, I love your work but would dearly like a mod to the system I bought from you to make it a little more civilized

Standard system is now back on my bike and your artwork is just sat on a shelf

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR